Experimental approach to assessment of safety against derailment of freight wagons
Само за регистроване кориснике
2022
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The paper presents an analysis of possible causes of damage to the tread of wheels and cracking of brake blocks of heavy-duty motor tower car VMT 980 C-GR. In order to determine the possible causes, a series of tests were done to check all the influences that led to the occurrence of these damages. The analysis included checking the regularity of the brake operation, non-destructive testing of the tread damage, and visual inspection of the brake blocks. The correctness of the brake operation was checked by stationary brake tests. The examination of the damage to the tread of the wheels was performed by non-destructive methods, using means for detecting microcracks and measuring the hardness. The results of the conducted tests indicate that the characteristics of the brake system are within the designed limits and are not the cause of damage to the wheels and the brake blocks. The measured values of hardness on the side and on the read are higher than the minimum required for test sampl...es according to EN 12362. The wheels are made of ER7 steel, which is used as a standard for railway wheels, with a chemical composition within the prescribed limits. Further analysis showed that significant surface damage to the brake blocks is a consequence of previous damage to the tread surface of the wheels. Visual inspection of the wheels showed flaking and cracking, indicating contact fatigue and the presence of thermal stresses as the most likely causes of brake blocks and wheel damage.
Кључне речи:
contact fatigue / thermal stresses / non-destructive testing / brake characteristics / heavy duty motor tower carИзвор:
The Book of Abstracts : International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022, 2022Издавач:
- Innovation Center of Faculty of Mechanical Engineering, Belgrade
Финансирање / пројекти:
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Milković, Dragan AU - Simić, Goran AU - Radulović, Saša AU - Lučanin, Vojkan AU - Kostić, Aleksandra PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/4191 AB - The paper presents an analysis of possible causes of damage to the tread of wheels and cracking of brake blocks of heavy-duty motor tower car VMT 980 C-GR. In order to determine the possible causes, a series of tests were done to check all the influences that led to the occurrence of these damages. The analysis included checking the regularity of the brake operation, non-destructive testing of the tread damage, and visual inspection of the brake blocks. The correctness of the brake operation was checked by stationary brake tests. The examination of the damage to the tread of the wheels was performed by non-destructive methods, using means for detecting microcracks and measuring the hardness. The results of the conducted tests indicate that the characteristics of the brake system are within the designed limits and are not the cause of damage to the wheels and the brake blocks. The measured values of hardness on the side and on the read are higher than the minimum required for test samples according to EN 12362. The wheels are made of ER7 steel, which is used as a standard for railway wheels, with a chemical composition within the prescribed limits. Further analysis showed that significant surface damage to the brake blocks is a consequence of previous damage to the tread surface of the wheels. Visual inspection of the wheels showed flaking and cracking, indicating contact fatigue and the presence of thermal stresses as the most likely causes of brake blocks and wheel damage. PB - Innovation Center of Faculty of Mechanical Engineering, Belgrade C3 - The Book of Abstracts : International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022 T1 - Experimental approach to assessment of safety against derailment of freight wagons UR - https://hdl.handle.net/21.15107/rcub_machinery_4191 ER -
@conference{ author = "Milković, Dragan and Simić, Goran and Radulović, Saša and Lučanin, Vojkan and Kostić, Aleksandra", year = "2022", abstract = "The paper presents an analysis of possible causes of damage to the tread of wheels and cracking of brake blocks of heavy-duty motor tower car VMT 980 C-GR. In order to determine the possible causes, a series of tests were done to check all the influences that led to the occurrence of these damages. The analysis included checking the regularity of the brake operation, non-destructive testing of the tread damage, and visual inspection of the brake blocks. The correctness of the brake operation was checked by stationary brake tests. The examination of the damage to the tread of the wheels was performed by non-destructive methods, using means for detecting microcracks and measuring the hardness. The results of the conducted tests indicate that the characteristics of the brake system are within the designed limits and are not the cause of damage to the wheels and the brake blocks. The measured values of hardness on the side and on the read are higher than the minimum required for test samples according to EN 12362. The wheels are made of ER7 steel, which is used as a standard for railway wheels, with a chemical composition within the prescribed limits. Further analysis showed that significant surface damage to the brake blocks is a consequence of previous damage to the tread surface of the wheels. Visual inspection of the wheels showed flaking and cracking, indicating contact fatigue and the presence of thermal stresses as the most likely causes of brake blocks and wheel damage.", publisher = "Innovation Center of Faculty of Mechanical Engineering, Belgrade", journal = "The Book of Abstracts : International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022", title = "Experimental approach to assessment of safety against derailment of freight wagons", url = "https://hdl.handle.net/21.15107/rcub_machinery_4191" }
Milković, D., Simić, G., Radulović, S., Lučanin, V.,& Kostić, A.. (2022). Experimental approach to assessment of safety against derailment of freight wagons. in The Book of Abstracts : International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022 Innovation Center of Faculty of Mechanical Engineering, Belgrade.. https://hdl.handle.net/21.15107/rcub_machinery_4191
Milković D, Simić G, Radulović S, Lučanin V, Kostić A. Experimental approach to assessment of safety against derailment of freight wagons. in The Book of Abstracts : International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022. 2022;. https://hdl.handle.net/21.15107/rcub_machinery_4191 .
Milković, Dragan, Simić, Goran, Radulović, Saša, Lučanin, Vojkan, Kostić, Aleksandra, "Experimental approach to assessment of safety against derailment of freight wagons" in The Book of Abstracts : International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022 (2022), https://hdl.handle.net/21.15107/rcub_machinery_4191 .