Претраживање
Приказ резултата 1-7 од 7
Water hammer with non-equilibrium gas release
(Elsevier Sci Ltd, Oxford, 2018)
Water hammer transient with gaseous cavitation in a pipe shows that the amplitude of the first pressure surge, caused by the closure of the fast valve, is approximate to the Joukowsky pressure rise in liquid, while subsequent ...
Finite element analysis of 90 degree pipe elbow sustained stress indices
(Elsevier Sci Ltd, Oxford, 2021)
Paper deals in-depth with the topic of sustained stress indices applicable to 90 degrees elbows based on non-linear finite element analysis models. A comprehensive overview of the existing literature sources is given in ...
On thermoplastic piping stress analysis
(Elsevier Sci Ltd, Oxford, 2020)
Thermoplastic piping is becoming increasingly important in the general industry applications. Owing mainly to their corrosion resistance, light weight and low maintenance requirements, plastic pipes can be found in many ...
Remaining strength of API J55 steel casing pipes damaged by corrosion
(Elsevier Sci Ltd, Oxford, 2020)
Experimental investigation of the integrity of casing pipes, used in the oil drilling rigs, withdrawn after about 70,000 h of service, has been conducted, together with numerical simulation. Pipes were manufactured by the ...
Assessment of corroded API 5L X52 pipe elbow using a modified failure assessment diagram
(Elsevier Sci Ltd, Oxford, 2021)
Pipe elbows (bends) are considered critical pressurized components in the piping systems and pipelines due to their stress intensification and the effect of bend curvature. They are prone and hence more exposed to different ...
Assessment of corroded API 5L X52 pipe elbow using a modified failure assessment diagram
(Elsevier Sci Ltd, Oxford, 2021)
Pipe elbows (bends) are considered critical pressurized components in the piping systems and pipelines due to their stress intensification and the effect of bend curvature. They are prone and hence more exposed to different ...
The resistance to crack growth of different regions of weldments in a real structure
(International Journal of Pressure Vessels and Piping, 1992)
The growth of a crack in regions of welded joints, made from high-strength low-alloy steel, has been analysed on specimens and full-scale structures. The effect of such crack growth on the safety of welded steel pressure ...