Search
Now showing items 1-10 of 10
Application of Numerical Methods in Design and Analysis of Orthopedic Implant Integrity
(Springer International Publishing Ag, Cham, 2019)
In this paper a numerical analysis of hip implant model and hip implant model with a crack in a biomaterial is presented. Hip implants still exhibit problem of premature failure, promoting their integrity and life at the ...
Thermal and Mechanical Characteristics of Dual Cure Self-etching, Self-adhesive Resin Based Cement
(Springer International Publishing Ag, Cham, 2019)
One of the main objectives in research and development of resin based cements (RBCs) is to enhance their clinical longevity and ease of use. In spite of the undeniable technological advances introduced in the last few ...
Research of Lean Premixed Flame by Chemiluminescence Tomography
(Springer International Publishing Ag, Cham, 2019)
An experimental research of lean premixed flame in a swirl burner is performed using CH* chemiluminescence imaging. The images of flame are acquired and the flame structure is investigated. The position of flame front, ...
Identification and Recognition of Vehicle Environment Using Artificial Neural Networks
(Springer International Publishing Ag, Cham, 2019)
Object detection using deep learning over the years became one of the most popular methods for implementation in autonomous systems. Autonomous vehicle requires very reliable and accurate identification and recognition of ...
Multiparameter Structural Optimization of Pressure Vessel with Two Nozzles
(Springer International Publishing Ag, Cham, 2019)
Structural analysis of pressure equipment (vessels) has always been a huge challenge for researchers. Pressure vessels are usually subjected to different loads in exploitation and small defects can lead to failure of the ...
TGA-DSC-MS Analysis of Pyrolysis Process of Various Biomasses with Isoconversional (Model-Free) Kinetics
(Springer International Publishing Ag, Cham, 2019)
Slow pyrolysis characteristics of different biomasses (hazelnut shell (HS), sawdust (Beech), and sawdust chemically treated (SDCT)) were investigated by simultaneous thermal analysis (STA), coupled with mass spectrometry ...
Mathematical Modelling and Performance Analysis of a Small-Scale Combined Heat and Power System Based on Biomass Waste Downdraft Gasification
(Springer International Publishing Ag, Cham, 2019)
The paper presents a simple mathematical model for designing, optimizing and simulating small-medium CHP scale plant with use of biomass waste downdraft gasification. A downdraft gasifier has been used as the starting point ...
Determination of the Wing Conveyor Idlers' Axial Loads Using the Finite Element Method
(Springer International Publishing Ag, Cham, 2019)
The impact of the axial load is often completely neglected in the design of the conveyor idlers (rollers) testing machines. The subject of the present research is focused primarily on the conveyor idlers load determination ...
Measurement of the Stress State in the Lower Link of the Three-Point Hitch Mechanism
(Springer International Publishing Ag, Cham, 2018)
Agricultural machines and their implements are subjected to dynamic loads during farm operations. Depending on the type of operation (e.g. lifting or plowing), lower links of the three-point hitch mechanism are exposed to ...
Experimental Dimensional Accuracy Analysis of Reformer Prototype Model Produced by FDM and SLA 3D Printing Technology
(Springer International Publishing Ag, Cham, 2019)
The subject of this paper is the evaluation of the dimensional accuracy of FDM and SLA 3D printing technologies in comparison with developed reformer polymer electrolyte membrane (PEM) fuel cell CAD model. 3D printing ...