Претраживање
Приказ резултата 1-10 од 19
Computational and experimental investigation into subsonic flow around a finned ogive cylinder
(Transactions of Famena, 2012)
Experimental and numerical investigation into the flow around an ogive cylinder with fins (missile calibration model) was conducted for Mach 0.6 flow. The computational results were compared to the results of pressure-distribution ...
Active boundary layer control in linear cascades using CFD and artificial neural networks
(Elsevier France-Editions Scientifiques Medicales Elsevier, Issy-Les-Moulineaux, 2014)
Flow field in linear cascades under high subsonic/transonic conditions has been investigated numerically. Active boundary layer control was employed in the form of sources (jets) distributed across the upper surface of the ...
Wear reducing of ventilation mill suction plates based on the multidisciplinary research
(Scibulcom Ltd., 2015)
The aim of this paper is to present the investigations of the possibilities of increasing the wear resistance of the ventilation mill parts for coal grinding in power plants, by application of optimum hard coating technologies. ...
Sensitivity analysis of different kinetic factors for numerical modeling of Serbian lignite devolatilization process
(International Journal of Heat and Mass Transfer, 2014)
Numerical modeling is widely used tool for prediction of combustion processes. Computational Fluid Dynamics - CFD models use three kinetic rates for description of the coal combustion processes: coal devolatilization, ...
Numerical Simulation of Aerodynamic Performance of Wing with Split Winglets
(Belgrade : Military Technical Institute, 2020)
Winglet is an additional surface in a form of vertical or horizontal extension of the wing. The shape of winglet changed during the development period and depending on the type of aircraft on which they were installed. Due ...
Prediction of calcination and sulphation along the sorbent particle trajectories for desulphurisation in coal-fired furnace
(Inderscience Enterprises Ltd, Geneva, 2020)
The furnace sorbent injection is analysed numerically, focusing on its behaviour, in order to estimate CaCO3 sorbent utilisation. Comprehensive presentation of numerical results and profound analysis are provided to better ...
Optimal propeller blade design, computation, manufacturing and experimental testing
(Emerald Group Publishing Ltd, Bingley, 2021)
Purpose Modern unmanned air vehicles (UAVs) are usually equipped with rotors connected to electric motors that enable them to hover and fly in all directions. The purpose of the paper is to design optimal composite rotor ...
Experimental and numerical methods for concept design and flow transition prediction on the example of the bionic high-speed train
(Springer, 2021)
In the times of significant development of high-speed train transportation and taking the primacy over the others, one of the major designing tasks is to predict accurately and fast the vehicle’s main performances, especially ...
Computational aerodynamic analysis of a small wind turbine
(University of East Sarajevo, Faculty of Mechanical Engineering, 2022)
The growing climate change issues and the ongoing energy crisis stipulate
further exploitation of renewable energy sources and the development of systems
capable to efficiently generate clean energy. Among the most ...
Numerical and experimental assessment of transonic turbulent flow around ONERA M4 model
(Belgrade : Military Technical Institute - VTI, 2016)
Experimental investigation of transonic flow at Mach number of 0.84 around a subsonic/transonic transport calibration model ONERA M4 at four different angles-of-attack has been conducted in T-38 trisonic blow-down wind ...