Претраживање
Приказ резултата 31-40 од 1410
Analysis of irrigation system drip by drip
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
This paper analyzes the irrigation system "drop by drop" because of its importance and effectiveness of the fruit. As a demonstration drip irrigation system was analyzed irrigation system installed on a private estate in ...
Numeričko modelovanje otvaranja vrha prsline u zavarenom spoju / Numerical modeling of crack tip opening in welded joint
(Institut za ispitivanje materijala, Beograd, 2010)
Zavareni spoj je heterogene strukture sa područjima različitih mikrostruktura. Da bi ispitali lokalno ponašanje područja prateći otvaranje prsline, problem je postaviti vrh zareza u željeni položaj. Izvedena je simulacija ...
Using Open Standards Based Building Information Modelling to Simulate Actual Design and Construction Processes
(Education and research in Computer Aided Architectural Design in Europe, 2011)
The paper describes pilot project conducted to achieve first understanding of the IFC standard and BIM process in Serbia. During the project a research team have developed information model of the actual building using IFC ...
Influence of crack length on ductile fracture initiation in welded joints with one and two weld metals
(Trans Tech Publications Ltd, Durnten-Zurich, 2011)
Among various micromechanical models for ductile fracture analysis using local approach, those based on the Gurson plastic flow criterion have been intensively developed in the past three decades. However, their application ...
Shaping machinery elements exposed to cyclic load
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2010)
On the grounds of previous research it can be concluded that any change in shape causes disturbance in the stress state of the strained element and the concentration of stress due to the diversion and densification of ...
Mathematical Modelling of Load and Stress Distribution in a Ball Bearing
(Civil Comp Press, Edinburgh, 2010)
External load of ball bearing is transferred from one ring to the other one through the balls. Load distribution between balls is unequal. Degree of load distribution inequality depends on internal geometry of bearing ...
Weld metal tensile strength determined by testing flat micro tensile and round tensile specimens
(Scientific Society for Mechanical Engineering, 2011)
Experimental investigation of temperature and strain-rate behaviour of Ti3Al-Nb alloy
(Scientific Society for Mechanical Engineering, 2011)
API J55 Steel Casing Pipe with an Initial Surface Crack under Internal Pressure - Determination of Fracture Parameters
(Trans Tech Publications Ltd, Durnten-Zurich, 2012)
Seam casing pipe used in an oil drilling rig, manufactured by high frequency (HF) contact welding of API J55 steel, is tested. The influence of an initial defect (machined surface crack) is analysed, by performing pressure ...
Experimental analysis of artificial hip implant made of titanium alloy
(University of Belgrade, 2012)