Претраживање
Приказ резултата 51-60 од 110
Digital image correlation in analysis of stiffness in local zones of welded joints
(Strojarski Facultet, 2016)
The behaviour of welded joints in local zones, as well as their mutual influence, represents one of the main challenges in welded structure design. Namely, the main issue lies in determining the mechanical properties of ...
Analysis of the supporting structure of composite material tool machine using the finite element method
(Univ Osijek, Tech Fac, Slavonski Brod, 2015)
Machines aimed for different purposes must be designed taking into account specific shape, type of load and materials they are made of. Nowadays different design solutions can easily be examined by using the finite element ...
Conveyor design optimization as the provision of sustainability
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2013)
Conveyors are machines which typically operate continuously during long periods of time. Even a small increase in energy efficiency leads toward considerable energy savings and therefore improved sustainability. The energy ...
Data Driven Root Cause Analyses in Multistage Manufacturing Utilising Life Cycle Wide Product Information
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
Root cause analyses in multistage manufacturing represents inspiration for constant improvement of existing methodologies and implementation of new ones. Using quality information data from manufacturing stage and customer ...
Two-dimensional wind tunnel measurement corrections by the singularity method
(Univ Osijek, Tech Fac, Slavonski Brod, 2015)
The correction method for pressure coefficient distribution around an airfoil is developed for the purpose of the postprocessing of wind tunnel data, obtained from the model pressure measurements. Pressure coefficient ...
A novel 6 dof thrust vector control test stand
(Univ Osijek, Tech Fac, Slavonski Brod, 2015)
This study proposes an innovative test stand design to accurately measure rocket motor thrust vector during its operation. Test stand design is clearly presented as well as procedure and mathematical model for its calibration. ...
Fluctuation of the dynamic load nature in the power transmission train
(Univ Osijek, Tech Fac, Slavonski Brod, 2016)
This paper analyses the impact of the selected parameters: operating mode, design parameters and condition of power transmission system onto the dynamic load of some on its components. Apart from analytical considerations, ...
Assessment of the maximum possible extension of bucket wheel schrs740 boom based on static and dynamic calculation
(Univ Osijek, Tech Fac, Slavonski Brod, 2016)
Bucket wheel boom represents the most loaded and the most responsible part of the excavator structure, participating only with 6 to 13 % in the entire excavator weight. Its length is selected depending on the technological ...
Simulation of Flat Die Deep Drawing Process by Variable Contact Pressure Sliding Model
(Univ Osijek, Tech Fac, Slavonski Brod, 2019)
Influence of the contact pressure in the deep drawing processes is a very actual research topic in the metal forming technology. Within this research the tribological model of the strip sliding in the flat die was developed. ...
Impact of sensor readings of grain mass yield on combine speed
(Strojarski Facultet, 2016)
The paper analyzes the impact of sensor readings of dry grain mass yield of wheat, barley and rapeseed on combine speed during harvesting on three plots. The combine was fitted with site-specific yield monitoring sensors. ...