Претраживање
Приказ резултата 1-10 од 14
Influence of second-phase particles on fracture behavior of PLA and advanced PLA-X material
(Elsevier Science Bv, Amsterdam, 2021)
Most widespread materials in Additive Manufacturing are PLA (PolyLactic Acid) and ABS (Acrylonitrile Butadiene Styrene), which are dissimilar materials in terms of printing abilities and mechanical properties. PLA material ...
Influence of Material Colour on Mechanical Properties of PLA Material in FDM Technology
(DAAAM International, 2019)
Today, one of the most used material in FDM (fused deposition modelling) 3D printing technology is PLA (polylactic
acid). On market today, there are many different companies that producing PLA material filament for 3D ...
Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer
(Elsevier B.V., 2022)
The majority of manufacturers of polymer filaments for FDM technology rely their datasheets only on tensile tests, so their documentation usually lacks any data concerning fracture mechanics parameters. Having in mind the ...
Effect of Infill Type and Density on Tensile Properties of PLA Material for FDM Process
(DAAAM International, 2019)
Fused deposition modeling (FDM) is a rapidly growing additive manufacturing technology for various applications in
field of engineering. Mechanical properties of 3D printed materials in FDM technology depend on various ...
Additive technology design for 3D printing and application to fast product development
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Quality of produced part depends based on generated G-code for 3D printing. Nowdays, various softwares for
3D printing technology design are presented. In this parer is presented procedure from product design to
funcional ...
Notch dimension discrepancy on SENB specimens fabricated from PLA and advanced PLA-X material
(20th International Colloqium on Mechanical Fatigue of Metals, 2021)
The subject of this paper is to experimentally investigate the geometrical properties of specimens obtained by Additive Manufacturing technology. Experimental tests were performed on SENB (Single Edge Notched Bending) ...
Influence of printing parameters on dimensional stability of SENB specimens made from PLA and PLA-X materials
(University of Belgrade, faculty of Mechanical Engineering, 2021)
The subject of this paper is to show how two similar materials, namely PLA and PLA-X, influence on
geometrical properties of additively manufactured SENB (Single-Edge Notched Bending) specimens.
Observed geometrical ...
Analysis of the materials usability in additive production technologies
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Nowadays it is in growing usage of additive production technologies, especially the FDM (Fused Deposition
Modeling) method. The most commonly used materials in 3D printing are ABS (Acrylonitrile butadiene styrene)
and ...
Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material
(Elsevier, Amsterdam, 2020)
FDM is a commercially widespread 3D printing technology which uses thermoplastic materials for building prototypes and functional parts. Most used materials in this technology are PLA (PolyLactic Acid) and ABS (Acrylonitrile ...
Layer thickness influence on impact properties of FDM printed PLA material
(Elsevier, 2024)
Polylactic Acid (PLA) is a widely used material in Fused Deposition Modeling (FDM) technology. Additive Manufacturing (AM) parameters are known to have an influence on the mechanical properties of final components. In FDM, ...