Search
Now showing items 1-10 of 19
Energetic and Environmental Adequacy of Biomass Thermal Insulation Materials
(Budapest University of Technology and Economics, Department of Energy Engineering, 2019)
Thermal behavior of a building is mostly determined by type and capacity of utilized insulation material. Synthetic and other conventional mass-produced insulations are largely efficient in their primary role of decreasing ...
Improving the Efficiency of District Heating and Cooling Using a Geothermal Technology: Underground Thermal Energy Storage (UTES)
(Springer, 2022)
For efficient operation of heating and cooling grids, underground thermal
energy storage (UTES) can be a key element. This is due to its ability to
seasonally store heat or cold addressing the large mismatch between ...
Notch dimension discrepancy on SENB specimens fabricated from PLA and advanced PLA-X material
(20th International Colloqium on Mechanical Fatigue of Metals, 2021)
The subject of this paper is to experimentally investigate the geometrical properties of specimens obtained by Additive Manufacturing technology. Experimental tests were performed on SENB (Single Edge Notched Bending) ...
Fragility and vulnerability analysis of RC buildings with different shapes in the base.
(Proceedings of the 2nd Croatian Conference on Earthquake Engineering – 2CroCEE. Zagreb, Croatia - March 22 to 24, 2023, 2023)
In this paper, the seismic response of a three 5 story reinforced concrete (RC) frame system buildings is analysed through the fragility and vulnerability analyses. The constructions are designed in accordance with the ...
Robustness and fragility of the RC building designed according to YU-81 and European Standards
(1st Croatian Conference on Earthquake Engineering. 22-24 March 2021 Zagreb, Croatia, 2021)
In the countries of the former Yugoslavia, the first regulations for the design of seismically resistant structures date back to 1964, and the reason for their adoption was the Skopje earthquake in 1963.
The next, much ...
Flexibility of power generation and possibilities for feasible upgrades of coal power plants: a case of the Electric Power Industry of Serbia
(Beograd : Društvo termičara Srbije, 2023)
This paper deals with current status and possibilities for feasible improvement of the flexibility of power generation fleet consisting of aged coal-fired power plants and hydro power plants. The analyses are done by use ...
UTILIZATION OF THE FLUE GAS WASTE HEAT BY THE LOW-PRESSURE ECONOMIZER AT 350 MWE LIGNITE-FIRED POWER PLANT
(Beograd : Društvo termičara Srbije, 2023)
Potential for the waste heat utilization in coal-fired thermal power plants that are in operation for a long period is reflected in an increased temperature of the flue gas at the exit of the regenerative air heater. After ...
Radionuclides and Heavy Metals Sorption onto Simulated Construction and Demolition Debris
(International conference of Science, Education, Technology and Innovation SETI 2019, 2019)
The construction and demolition debris (C&DD) utilization as sorbent for radionuclides and heavy metals, was investigated following the European directives on waste, saving natural raw materials and recommendations for all ...
The new thermal insulation material based on Mischantus x Giganteus and fly ash
(Bor : Mining and Metallurgy Institute, 2018)
Investigations were carried out to study the fly ash utilization in manufacturing of thermal insulation based on Miscanthus x Giganteus fibres. This is a brand new cost-effective, environment-friendly and energy-efficient ...
Technological and Economic Assessment of Different Models of Geometrically Complex Forms of Glass Envelopes
(Delft: TU Delft Open, 2018)
The main concern of this research is to create links and interactive relationship between the design process on the conceptual level, materialization and realization of geometrically complex form of glass envelope. Based ...