Претраживање
Приказ резултата 1-10 од 30
Vickers hardness indentation size effect in selective laser melted MS1 maraging steel
(Sage Publications Ltd, London, 2021)
In this paper, selective laser melting fabricated specimens in non-heat-treated and heat-treated conditions were subjected to Vickers microhardness testing, by using a full range of loadings: 10, 25, 50, 100, 200, 300, ...
Numerical Simulation of Fatigue Crack Growth in Titanium Alloy Orthopaedic Plates
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
Biomaterials intended for orthopaedic plates manufacturing have much higher mechanical properties relative to the bone itself and still there are many cases where those plates fracture in service, with fatigue as the main ...
Analytical vs Numerical Calculation of Fatigue Life for Different Welded Joint Regions
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
This research will show the analytical way of determining the remaining life of a welded joint with a fatigue crack initiated in its heat affected zone. The calculation will be divided into two stages, since the fatigue ...
Sustainable development of pressure equipment using 3d digital image correlation method
(Savez hemijskih inženjera, Beograd, 2020)
As pressure equipment is most commonly used in various industrial fields, making manufacturing processes eco-friendlier (e.g., mass reduction of the final product, material and energy savings, etc.) and transitioning to ...
Turbulence recognition in free convective flow by thermal-video post-processing in the case of a thermal power plant mill
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2021)
This paper presents a study of a free convection flow around the walls of a ventilation mill of the Thermal Power Plant "Kostolac B", Kostolac, Serbia. A combined method consists of thermography and software post-processing, ...
Experimental and numerical study of temperature field during hard-facing of different carbon steels
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2020)
In this research the 3-D transient non-linear thermal analysis of the hard-facing process was performed by using the experimental testing and finite element method. Testing was done at three different carbon steels and the ...
Structural Integrity Assessment of Welded Pipeline Designed with Reduced Safety
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
The main goal of this paper was to assess the integrity of welded joints in the main pipeline of the reversible hydropower plant "Bajina Bata". Japanese steel Sumiten 80P (SM 80P) was used as the parent material. European ...
Kinetic parameters identification of conductive enhanced hot air drying process of food waste
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2021)
The efficient utilization of waste from food industry is possible after thermal treatment of the material. This treatment should be economically feasible and compromise the energy efficient drying process. The main goal ...
Derivation of Elastic Constants for Orthotropic Plates
(Korean Soc Steel Construction-Kssc, Seoul, 2020)
The paper presents a procedure for modeling an orthotropic thin plate finite element so to have an equivalent structural response as the steel stiffened plate of same overall dimensions. New, equivalent element, homogenizes ...
Numerical evaluation of thermal stresses generated in laminated composite structure exposed to low temperatures
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2021)
This paper presents numerical calculation of thermal stresses generated in a carbon fiber-epoxy laminated composite structure which is operating at low temperatures. The thermal stress evaluation is based on the finite ...