Претраживање
Приказ резултата 61-69 од 69
Possibility of Reducing the Overpressure of Shock Wave of Powder Gases around the Mortar
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
This paper resulted from the research of the overpressure of the shock wave of the powder gases, which occurs during firing of the mortar. Work encompasses modeling and computation of the overpressure field. Increasing ...
XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring
(Springer, New York, 2019)
The numerical analysis of the behaviour of a pressure vessel with a reinforcement ring subjected to both static and dynamic load is presented in this paper. This research was based on a previous analysis which involved ...
Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments
(Taylor & Francis Ltd, Abingdon, 2016)
Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data ...
Digital Image Correlation Analysis of Vertically Loaded Cylindrical Ti-Implants With Straight and Angled Abutments
(Springer, New York, 2016)
The purpose of this study was to investigate the influence of the abutment angulation upon the strain distribution pattern for the vertical loading situation by means of the digital image correlation (DIC) method. In ...
Ductile fracture prediction of steam pipeline steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
Considering the conditions to which steels used for the manufacture of steam pipelines are exposed, the micromechanism of their destruction in exploitation is exclusively the ductile one. In order to make an estimation of ...
Mathematical modeling and experimental investigation of a composite beam failure - Case study
(London : Sage Publications Ltd, 2023)
Composite materials have been extensively employed in the aviation industry in recent years. The application of new materials enables significant weight savings with improved mechanical characteristics. This is also very ...
Assessing the forest management in the Novi Pazar region (Southwest Serbia)
(FRESENIUS ENVIRONMENTAL BULLETIN, 2022)
To address the question of weather stands are managed sustainably in the Novi Pazar region (Southwest Serbia), this study compares the quantity of standing wood biomass in the Debeljak-Medenovac unit at the beginning and ...
Contemporary Maintenance Management of Power Plant Life Exhaustion Components
(Technics Technologies Education Management, 2010)
Reliability centered maintenance (RCM) has a key role in the quality system of thermal power plants. Electricity production is definitely not only production of a product, but also becomes a customer service. Reliability ...
An Approach to the Optimization of a Thin-walled Z-beam
(Strojniski Vestnik/Journal of Mechanical Engineering, 2009)
One approach to the optimization of a thin-walled open section Z-beam subjected to bending and to the constrained torsion is considered. For given loads, material and geometrical characteristics the problem is reduced to ...