Претраживање
Приказ резултата 21-30 од 31
Structural Integrity Assessment of Welded Pipeline Designed with Reduced Safety
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
The main goal of this paper was to assess the integrity of welded joints in the main pipeline of the reversible hydropower plant "Bajina Bata". Japanese steel Sumiten 80P (SM 80P) was used as the parent material. European ...
Structural integrity analysis of a cracked pressure vessel
(Institut za ispitivanje materijala, Beograd, 2021)
Stress distribution, as obtained by finite element method (FEM), and corresponding fracture mechanics parameters, have been used for the integrity assessment of a pressure vessel. Once the stress distribution is known, the ...
Welded joints as critical regions in pressure vessels - case study of vinyl-chloride monomer storage tank
(Savez hemijskih inženjera, Beograd, 2018)
Welded joints are analysed as critical regions in a pressure vessel in respect to structural failure due to the elastic-plastic fracture/crack growth. To assess structural integrity of pressure vessels used in chemical ...
Industrial safety of pressure vessels - Structural integrity point of view
(Savez hemijskih inženjera, Beograd, 2016)
This paper presents different aspects of pressure vessel safety in the scope of industrial safety, focused to the chemical industry. Quality assurance, including application of PED97/23 has been analysed first, followed ...
Evaluation of the Locking Compression Plates Stress-Strain Fields
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
Locking Compression Plates (LCP) have found application in the orthopaedic healing process in modern medicine. Their design is specifically modified depending on the bone and the loading the specific bone is subjected to. ...
Integrity assessment of vital beam components that enable conjoint operation of two bridge cranes
(Institut za ispitivanje materijala, Beograd, 2018)
Vital components of the beam that enable conjoint operation of two bridge cranes are braces and threaded spindle. The beam connects two bridge cranes with overall lifting capacity of 500 t (2 x 250 t) and enables their ...
Residual life of a historic riveted steel bridge - engineering critical assessment approach
(Elsevier, 2022)
Sustainability has become an increasingly important component of requirements for the rehabilitation of bridge structures.
Responsible use of our limited natural resources is essential for future generations, so the whole ...
Integrity of Welded Joints Made of Alloy NiCr21Mo
(Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“, Institut za ispitivanje materijala (IMS), Beograd, 2023)
The research covers the investigation of mechanical properties of welded joint made on NiCr21Mo alloy (commercial trademark Incoloy 825), and joints of steels P355GH and X2CrNiMo17-12-2, as well as the influence of the ...
Integrity assessment of autoclaves after reconstruction
(STRUCTURAL INTEGRITY AND LIFE, 2022)
The paper describes the reconstruction procedure of 3 autoclaves, i.e. equipment used for drying raw coal. Due to material degradation in working conditions and damage, the lower part of the autoclave, of steel Altherm 55 ...
Measurement of strain using stereometry
(Faculty of Mechanical Engineering in Slavonski Brod, Faculty of Electrical Engineering in Osijek, Faculty of Civil Engineering in Osijek, 2009)
This paper presents measurement of strain using stereometry method. It describes the use of digital stereometry to measure microstrains on the surface. This can be achieved by comparison of the images of point distribution ...