Претраживање
Приказ резултата 21-30 од 74
Austempering Kinetics of Cu-Ni Alloyed Austempered Ductile Iron
(Korean Inst Metals Materials, Seoul, 2014)
The aim of the paper was to investigate the effect of austempering parameters (time and temperature) on the microstructure and mechanical properties of ADI alloyed with 1.5% Cu and 1.6% Ni (in wt.%) in order to establish ...
Creep crack growth properties of P91 and P22 welded joints
(Wiley, Hoboken, 2017)
The ferritic P22 and bainitic-martenstic P91 steel welded joints operating at elevated temperatures are highly vulnerable to premature failure, because microstructure gradients can lead to cracking in the heat-affected ...
Ductile fracture of pipe-ring notched bend specimens - Micromechanical analysis
(Pergamon-Elsevier Science Ltd, Oxford, 2017)
Integrity of pipes is typically assessed by testing fracture mechanics specimens, such as compact tensile (CT) or single-edge notched bending (SENB). However, for some pipe dimensions it is not easy or possible to fabricate ...
Experimental studies on active vibration control of smart plate using a modified PID controller with optimal orientation of piezoelectric actuator
(Sage Publications Ltd, London, 2016)
This paper presents a design, development and experimental verification of an active vibration control system of aluminum plate. The active structure consists of an aluminum rectangular plate as the host structure, strain ...
An attempt to create a standardized (reference) model for experimental investigations on implant's sample
(Elsevier Sci Ltd, Oxford, 2015)
The aim of this study was to determine, evaluate and measure strain of vertically loaded implant using the digital image correlation method. The Straumann (R) dental implant system with the SLActive (R) surface was used ...
Geometry, mechanical and ballistic properties of ADI material perforated plates
(Elsevier Sci Ltd, Oxford, 2015)
In this paper, austempered ductile iron has been evaluated as an alternative to steel for perforated plates applied in the ballistic protection of military vehicles. The austempering was performed in lower and higher ...
Integrity assessment and determination of residual fatigue life of vital parts of bucket-wheel excavator operating under dynamic loads
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper are presented results of tests and analyses of complex dynamic loads carried out on the bucket-wheel excavator SchRs 650/5x24 Krupp, as well as assessment of service life of vital welded structures of a ...
Utilization of waste ceramics and roof tiles for radionuclide sorption
(Inst Chemical Engineers, Rugby, 2017)
The possible utilization of waste ceramic (CT) and roof tiles (RT), as sorbents for liquid radioactive waste (LRW) treatment, was investigated. Following the European directives on waste and politics of saving natural raw ...
Design of capacitive voltage divider for measuring ultrafast voltages
(Elsevier Sci Ltd, Oxford, 2018)
The aim of this paper is to consider and analyze design of capacitive voltage divider for measuring ultrafast voltage occurrence. Measuring pulse voltages by means of a capacitive divider in nanosecond range is affected ...
Fracture assessment of seam and seamless steel pipes by application of the ring-shaped bending specimens
(Elsevier, Amsterdam, 2019)
The topic of this work is analysis of fracture behaviour and resistance of the thin-walled seamless and seam steel pipes, through application of the recently proposed ring-shaped specimen (PRNB - Pipe Ring Notched Bend). ...