Преглед IC - radovi istraživača аутора: "Travica, Milan"
Приказ резултата 1-20 од 23
-
Additive technology design for 3D printing and application to fast product development
Jevtić, Ivana; Mladenović, Goran; Milošević, Miloš; Trajković, Isaak; Travica, Milan; Milovanović, Aleksa; Stojmanovski, Viktor (University of Belgrade, faculty of Mechanical Engineering, 2021) -
Analysis of parameter impact on 3D printed experimental samples for tensile testing
Milošević, Miloš; Milovanović, Aleksa; Mladenović, Goran; Kolesar, Svetozar; Pandžić, Adi; Travica, Milan; Mitrović, Nenad (Innovation Center of Faculty of Mechanical Engineering, 2019) -
Analysis of the materials usability in additive production technologies
Jevtić, Ivana; Mladenović, Goran; Milošević, Miloš; Trajković, Isaak; Travica, Milan; Milovanović, Aleksa (University of Belgrade, faculty of Mechanical Engineering, 2021) -
Comparison of Tensile Properties of Carbon/Epoxy Composite Materials with Different Fiber Orientation Using Digital Image Correlation
Jelić, A.; Travica, Milan; Ugrinović, Vukašin; Božić, A.; Stamenović, Marina; Brkić, D.; Putić, Slaviša (Springer Science and Business Media Deutschland GmbH, 2022) -
Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)
Jelić, Aleksandra; Sekulić, Milica; Travica, Milan; Grzetić, Jelena; Ugrinović, Vukašin; Marinković, Aleksandar D.; Bozić, Aleksandra; Stamenović, Marina; Putić, Slaviša (MDPI, Basel, 2022) -
Determining fracture mechanics parameters using the digital image correlation method on cylindrical samples produced by different additive manufacturing techniques
Trajković, Isaak; Milošević, Miloš; Travica, Milan; Rakin, Marko; Jevtić, Ivana; Sedmak, Aleksandar; Međo, Bojan (Faculty of Mechanical Engineering, Univ. of Belgrade, 2022) -
Development of the experimental methodology of strain measurement simulated in partly-edentulous artificial mandible
Milovanović, Aleksa; Milošević, Miloš; Maneski, Taško; Mitrović, Nenad; Travica, Milan; Poštić, Srđan; Mladenović, Goran (Innovation Center of Faculty of Mechanical Engineering, 2019) -
Deviation measurement of SLS PA material regarding location and orientation of printing
Jevtić, Ivana; Mladenović, Goran; Milošević, Miloš; Milovanović, Aleksa; Trajković, Isaak; Travica, Milan (Serbian Ceramic Society, 2022) -
Dimensional Accuracy of Compressive Specimens Obtained by SLS Technology
Jevtić, Ivana; Mladenović, Goran; Milošević, Miloš; Milovanović, Aleksa; Travica, Milan; Trajković, Isaak (Springer, 2024) -
Dimensional accuracy of parts obtained by SLS technology
Jevtić, Ivana; Mladenović, Goran; Milošević, Miloš; Milovanović, Aleksa; Trajković, Isaak; Travica, Milan (Structural integrity and life, 2022) -
Evaluation of true stress-strain diagrams for welded joints by application of Digital Image Correlation
Milošević, Nenad; Younise, Bashir; Sedmak, Aleksandar; Travica, Milan; Mitrović, A. (Pergamon-Elsevier Science Ltd, Oxford, 2021) -
Experimental and numerical determination of the fracture strength of PA12 material on specimens produced by selective laser sintering
Milošević, Miloš; Travica, Milan; Rakin, Marko; Sedmak, Aleksandar; Međo, Bojan; Trajković, Isaak; Milošević, Miloš (Serbian Ceramic Society, 2023) -
Experimental and numerical integrity assessment of home window profiles and frames
Milovanović, Aleksa; Milošević, Miloš; Mladenović, Goran; Travica, Milan; Mitrović, Nenad; Kirin, Snežana; Trajković, Isaak (Innovation Center of Faculty of Mechanical Engineering, 2020) -
Experimental Evaluation of Hoop Stress–Strain State of 3D-Printed Pipe Ring Tensile Specimens
Travica, Milan; Mitrović, Nenad; Petrović, Aleksandar; Trajković, Isaak; Milošević, Miloš; Sedmak, Aleksandar; Berto, Filippo (MDPI, 2022) -
Experimental setup development of additively manufactured mandible with teeth and compensations subjected to compressive load
Milošević, Miloš; Poštić, Srđan; Mitrović, Nenad; Milovanović, Aleksa; Travica, Milan; Golubović, Zorana; Mladenović, Goran (Faculty of Technology and Metallurgy, Research and Development Centre of Printing Technology, 2019) -
Influence of printing parameters on dimensional stability of SENB specimens made from PLA and PLA-X materials
Jevtić, Ivana; Milovanović, Aleksa; Trajković, Isaak; Travica, Milan; Sedmak, Aleksandar; Grbović, Aleksandar; Berto, Filippo (University of Belgrade, faculty of Mechanical Engineering, 2021) -
Laser sintered polyamide specimens - fabrication and tensile testing conditions on different geometries
Trajković, Isaak; Milošević, Miloš; Travica, Milan; Rakin, Marko; Jevtić, Ivana; Sedmak, Aleksandar; Međo, Bojan (Serbian Ceramic Society, 2022) -
Monitoring of fracture mechanics parameters on single edge notched tension specimens made of PLA material
Trajković, Isaak; Milovanović, Aleksa; Jevtić, Ivana; Travica, Milan; Marsavina, Liviu; Međo, Bojan; Náhlík, Luboš (International conference of experimental and numerical investigations and new technologies (2021 ; Zlatibor), 2021) -
Notch dimension discrepancy on SENB specimens fabricated from PLA and advanced PLA-X material
Jevtić, Ivana; Milovanović, Aleksa; Trajković, Isaak; Travica, Milan; Sedmak, Aleksandar; Grbović, Aleksandar; Milošević, Miloš (20th International Colloqium on Mechanical Fatigue of Metals, 2021) -
Novel Method for Measurement of Pipeline Materials Fracture Resistance-Examination on Selective Laser Sintered Cylindrical Specimens
Trajkovic, Isaak; Milošević, Miloš; Travica, Milan; Rakin, Marko; Mladenović, Goran; Kudrjavceva, Ljudmila; Međo, Bojan (International Institute for the Science of Sintering, 2022)