Претраживање
Приказ резултата 1-10 од 14
Influence of second-phase particles on fracture behavior of PLA and advanced PLA-X material
(Elsevier Science Bv, Amsterdam, 2021)
Most widespread materials in Additive Manufacturing are PLA (PolyLactic Acid) and ABS (Acrylonitrile Butadiene Styrene), which are dissimilar materials in terms of printing abilities and mechanical properties. PLA material ...
Influence of Material Colour on Mechanical Properties of PLA Material in FDM Technology
(DAAAM International, 2019)
Today, one of the most used material in FDM (fused deposition modelling) 3D printing technology is PLA (polylactic
acid). On market today, there are many different companies that producing PLA material filament for 3D ...
Effect of Infill Type and Density on Tensile Properties of PLA Material for FDM Process
(DAAAM International, 2019)
Fused deposition modeling (FDM) is a rapidly growing additive manufacturing technology for various applications in
field of engineering. Mechanical properties of 3D printed materials in FDM technology depend on various ...
Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer
(Elsevier B.V., 2022)
The majority of manufacturers of polymer filaments for FDM technology rely their datasheets only on tensile tests, so their documentation usually lacks any data concerning fracture mechanics parameters. Having in mind the ...
Experimental determination of type of fracture PLA specimens in the function of printing conditions
(Innovation Center of Faculty of Mechanical Engineering, 2019)
Fused Filament Fabrication (FFF) represent one of the technologies to process polymer materials in the way
of rapid prototyping. Parts produced by this method not so rarely have good mechanical properties in the
tangential ...
Numerical analysis of PLA material orthopaedic plates
(International conference of experimental and numerical investigations and new technologies (2022 ; Zlatibor), 2022)
Additive Manufacturing (AM) provides many applications in different high-demand engineering fields, i.e., automotive, aeronautical and biomedical fields. For biomedical applications, biodegradable thermoplastics, such as ...
Layer thickness influence on impact properties of FDM printed PLA material
(Elsevier, 2024)
Polylactic Acid (PLA) is a widely used material in Fused Deposition Modeling (FDM) technology. Additive Manufacturing (AM) parameters are known to have an influence on the mechanical properties of final components. In FDM, ...
Monitoring of fracture mechanics parameters on single edge notched tension specimens made of PLA material
(International conference of experimental and numerical investigations and new technologies (2021 ; Zlatibor), 2021)
In order to characterize the fracture toughness of single edge notched tension (SENT) specimens, this paper describes the experimental determination of fracture mechanics parameters such as crack mouth opening displacement ...
Additive technology design for 3D printing and application to fast product development
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Quality of produced part depends based on generated G-code for 3D printing. Nowdays, various softwares for
3D printing technology design are presented. In this parer is presented procedure from product design to
funcional ...
Notch dimension discrepancy on SENB specimens fabricated from PLA and advanced PLA-X material
(20th International Colloqium on Mechanical Fatigue of Metals, 2021)
The subject of this paper is to experimentally investigate the geometrical properties of specimens obtained by Additive Manufacturing technology. Experimental tests were performed on SENB (Single Edge Notched Bending) ...