Претраживање
Приказ резултата 1-10 од 20
Effect of building direction and heat treatment on mechanical properties of Inconel 939 prepared by additive manufacturing
(Springer Nature, 2023)
This study investigated the effect of building direction (BD) and three-step heat treatment on the microstructure and mechanical properties of a nickel-based superalloy Inconel 939 produced by additive manufacturing (AM), ...
Improving the Efficiency of District Heating and Cooling Using a Geothermal Technology: Underground Thermal Energy Storage (UTES)
(Springer, 2022)
For efficient operation of heating and cooling grids, underground thermal
energy storage (UTES) can be a key element. This is due to its ability to
seasonally store heat or cold addressing the large mismatch between ...
Fragility and vulnerability analysis of RC buildings with different shapes in the base.
(Proceedings of the 2nd Croatian Conference on Earthquake Engineering – 2CroCEE. Zagreb, Croatia - March 22 to 24, 2023, 2023)
In this paper, the seismic response of a three 5 story reinforced concrete (RC) frame system buildings is analysed through the fragility and vulnerability analyses. The constructions are designed in accordance with the ...
The influence of material infill on ABS-X flexural strength
(Springer, 2023)
This paper contains a comparison of the flexural strength results of two different samples. Both samples were made using additive manufacturing, from ABS (acrylonitrile butadiene styrene) material with the inclusion of an ...
Application of Composite Construction and Demolition Debris in Heavy Metals Removal from Industrial Wastewater
(Thermal Science, 2023)
The utilization of construction and demolition debris in industrial wastewater treatment by sorption of Co2+ and Ni2+ ions was investigated. Selected waste composites are cost-effective and locally available, still their ...
Probability distribution on cleavage fracture in function of Jc for reactor ferritic steel in transition temperature region
(Engineering Failure Analysis, 2021)
This paper presents the results and methods used for determining of probability of cleavage fracture toughness of ferritic reactor steel in transition temperature area. The steel tested in this study is steel know as ...
Review: Advantages of Repairing Machine Parts in Order to Restore their Functionality
(Advanced Materials Research, 2022)
This paper covers the literature review of the work by author, who have been involved in
the subject of machine element repairing from the techno-economical point of view. Positive
aspects of repairing, as opposed to ...
Printing orientation influence on tensile strength of PA12 specimens obtained by SLS
(Springer, 2023)
Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for ...
Flexibility of power generation and possibilities for feasible upgrades of coal power plants: a case of the Electric Power Industry of Serbia
(Beograd : Društvo termičara Srbije, 2023)
This paper deals with current status and possibilities for feasible improvement of the flexibility of power generation fleet consisting of aged coal-fired power plants and hydro power plants. The analyses are done by use ...
Development and Improvement of Numerical Models of Welded Joints with Multiple Defects
(Trans Tech Publications, 2023)
This paper presents the development of numerical models which were used to simulate
the behaviour of welded joints containing different combinations of multiple defects under tensile
loads. Four representative combinations ...