Претраживање
Приказ резултата 1-10 од 201
Thermohydraulic experimental design for the European Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2008)
The peculiarities of the coolant flow in Helium-Cooled-Pebble-Bed Test Blanket Module (TBM) are (i) very intensive heating of the first wall from the plasma side and (ii) very complicated geometry of How domain consisting ...
Micromechanical estimates of the critical values of j-integral for the steel of steam pipelines
(Springer, New York, 2009)
We analyze the level of damage to 14MoV63 steel for steam pipelines under the conditions of crack-growth initiation according to the mechanism of ductile fracture. The state of the material after service for about 100,000 ...
Transition temperature and fracture mode of as-castand austempered ductile iron
(Wiley, Hoboken, 2008)
The ductile to brittle transition temperature is a very important criterion that is used for selection of materials in some applications, especially in low-temperature conditions. For that reason, in this paper transition ...
Uticaj ekvivalentnog sadržaja kiseonika u mešavini gasova na strukturu i žilavost metala šava mikrolegiranih čelika / The influence of the oxygen equivalent in a gas-mixture on the structure and toughness of microalloyed steel weldments
(Srpsko hemijsko društvo, Beograd, 2006)
Ispitivanja su izvedena na dva čelika. Prvi je mikrolegiran sa Nb, a drugi sa: Ti, Nb i V. Žilavost metala šava navedenih čelika je određena na instrumentiranom Šarpijevom klatnu. Pet različitih mešavina gasova (Ar, CO2, ...
Microstructure Changes of Nickel-Base Superalloys Induced by Interaction with Femtosecond Laser Beam
(Polish Acad Sciences Inst Physics, Warsaw, 2009)
The investigation was performed on nickel-base superalloys, with nickel being the most influential alloying ingredient. After thermo-mechanical preparation and corresponding processing, femtosecond laser beam machining has ...
Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel
(Taylor & Francis Inc, Philadelphia, 2008)
Global warming leads to research-development attempts worldwide with a view to reduce CO2 emission. Therefore, in the energy supply sector, a special focus has been directed to further development of steels that can endure ...
Radiation Absorption Characteristics of Titanium Alloys
(Polish Acad Sciences Inst Physics, Warsaw, 2009)
Titanium alloys have found numerous applications in space research, and nuclear industry and research. Since X-rays constitute an important part of the space radiation environment, numerical simulations of radiation ...
Methodology of physical occurrences analogy in researching vehicle lifetime
(Technics Technologies Education Management, 2011)
Lifetime as a critical dimension of the quality of a product is most often studied using the unreliability curve, when there are problems in determining the origin in terms of time limit (Delta t), since monitoring usually ...
The influence of buffer layer on the properties of surface welded joint of high-carbon steel
(Institute of Metals and Technology, 2011)
Surface welding with buffer layer is often in use because of its well-known properties of plasticity, or ability to slow crack growth initiated. However, in modern surface welding technologies, buffer layer is rarely used. ...
Measurement of local deformation fields in dental composites using 3d optical system
(Chemicke Listy, 2011)
Polymerization shrinkage is the single most important local deformation of dental composites that has a substantial effect on the quality of the tooth-restoration interface in clinical conditions. The aim of this study was ...