Претраживање
Приказ резултата 1-10 од 66
With frequency simulation to design the monitoring of frame structures
(Institute of Physics Publishing, 2018)
Based on experience from the testing of the mining stacker in the copper mine in Bor, a practical procedure of frequency simulation of the enforced vibration of the structure was demonstrated. Modelling of the excitation ...
Analysis of strain distribution in overmatching V groove weld using digital image correlation
(Elsevier Science Bv, Amsterdam, 2018)
Welded joints are treated as critical sites when constructing and calculating welded structures due to inhomogeneity and anisotropy of materials at the welded joint site. Because of the change in the geometry of the elements, ...
Permanent ground displacement across earthquake faults, landslides and natural slopes
(Elsevier Science Bv, Amsterdam, 2018)
Permanent ground displacement analysis methods, as very important aspect of the seismic dynamic analysis is explained in the paper. A methodology for probabilistic hazard assessment of permanent displacement across natural ...
Measuring the axial force on turbo-jet engine rotor
(DANUBIA Adria Symposium on Advances in Experimental Mechanics, 2018)
Effect of temperature and exploitation time on tensile properties and plain strain fracture toughness, K-Ic, in a welded joint
(Elsevier Science Bv, Amsterdam, 2018)
Effect of temperature and exploitation time on resistance to brittle fracture of welded joint constituents of new and 40 years exploited low-alloyed Cr-Mo steel A-387 Gr. B has been analysed. The plane strain fracture ...
Design and testing characteristics of thin stainless steel diaphragms
(Elsevier Science Bv, Amsterdam, 2018)
Metal membranes are defined as thin steel circular plates. The metal membranes are widely used in the measurement technique and they are constantly loaded over the entire surface. In case that a membrane is loaded with ...
The development and application of the new methodology for conveyor idlers fits testing
(Elsevier Science Bv, Amsterdam, 2018)
The proper interference fit between the joined parts is a prerequisite for an effective pressure joint. The main purpose of the pressure joint is to transfer tangential, radial and axial loads between the joined parts. In ...
Effects of welding technology on the occurrence of fracture in welded joints
(Elsevier Science Bv, Amsterdam, 2018)
Welded joints represent locations where failure is most likely to occur in welded structures. Welded joint failure depends on their vulnerability to crack initiation and growth. These factors are significantly influenced ...
Model analysis of complex structures - advantages of physical sub-scaled model testing and shortcomings in physical model production
(Elsevier Science Bv, Amsterdam, 2018)
The possibilities of testing real constructions strength are often limited, especially in case of large constructions. Testing on the model, instead of the actual construction, results in a great saving of money and time. ...
Development of numerical-experimental model of connecting lugs and application on the lugs calculation of container terminals
(Elsevier Science Bv, Amsterdam, 2018)
The present paper describes numerical and experimental methodology and development of the model for stress and deformation state analysis of the connecting lug of container terminals. Numerical analysis was conducted by ...