Претраживање
Приказ резултата 1-10 од 14
Influence of Material Colour on Mechanical Properties of PLA Material in FDM Technology
(DAAAM International, 2019)
Today, one of the most used material in FDM (fused deposition modelling) 3D printing technology is PLA (polylactic
acid). On market today, there are many different companies that producing PLA material filament for 3D ...
Monitoring of fracture mechanics parameters on single edge notched tension specimens made of PLA material
(International conference of experimental and numerical investigations and new technologies (2021 ; Zlatibor), 2021)
In order to characterize the fracture toughness of single edge notched tension (SENT) specimens, this paper describes the experimental determination of fracture mechanics parameters such as crack mouth opening displacement ...
Numerical analysis of PLA material orthopaedic plates
(International conference of experimental and numerical investigations and new technologies (2022 ; Zlatibor), 2022)
Additive Manufacturing (AM) provides many applications in different high-demand engineering fields, i.e., automotive, aeronautical and biomedical fields. For biomedical applications, biodegradable thermoplastics, such as ...
Layer thickness influence on impact properties of FDM printed PLA material
(Elsevier, 2024)
Polylactic Acid (PLA) is a widely used material in Fused Deposition Modeling (FDM) technology. Additive Manufacturing (AM) parameters are known to have an influence on the mechanical properties of final components. In FDM, ...
Experimental determination of type of fracture PLA specimens in the function of printing conditions
(Innovation Center of Faculty of Mechanical Engineering, 2019)
Fused Filament Fabrication (FFF) represent one of the technologies to process polymer materials in the way
of rapid prototyping. Parts produced by this method not so rarely have good mechanical properties in the
tangential ...
Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material
(Elsevier, Amsterdam, 2020)
FDM is a commercially widespread 3D printing technology which uses thermoplastic materials for building prototypes and functional parts. Most used materials in this technology are PLA (PolyLactic Acid) and ABS (Acrylonitrile ...
Notch dimension discrepancy on SENB specimens fabricated from PLA and advanced PLA-X material
(20th International Colloqium on Mechanical Fatigue of Metals, 2021)
The subject of this paper is to experimentally investigate the geometrical properties of specimens obtained by Additive Manufacturing technology. Experimental tests were performed on SENB (Single Edge Notched Bending) ...
Influence of printing parameters on dimensional stability of SENB specimens made from PLA and PLA-X materials
(University of Belgrade, faculty of Mechanical Engineering, 2021)
The subject of this paper is to show how two similar materials, namely PLA and PLA-X, influence on
geometrical properties of additively manufactured SENB (Single-Edge Notched Bending) specimens.
Observed geometrical ...
Analysis of the materials usability in additive production technologies
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Nowadays it is in growing usage of additive production technologies, especially the FDM (Fused Deposition
Modeling) method. The most commonly used materials in 3D printing are ABS (Acrylonitrile butadiene styrene)
and ...
Additive technology design for 3D printing and application to fast product development
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Quality of produced part depends based on generated G-code for 3D printing. Nowdays, various softwares for
3D printing technology design are presented. In this parer is presented procedure from product design to
funcional ...