Претраживање
Приказ резултата 1-4 од 4
The influence of microstructure on ductile fracture initiation in low-alloyed steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
In this paper the quantitative microstructural analysis of low-alloyed pressure vessel steel has been discussed. The values of volume fraction and mean free path of non-metallic inclusions determined in that way were used ...
Analysis of the Influence of Microstructure Heterogeneity and Mechanical Properties of Welded Joint Constituents on Fracture Toughness for Plane Strain, K-Ic
(Trans Tech Publications Ltd, Durnten-Zurich, 2012)
The problem of fracture toughness, K-Ic, determination at a crack tip localized in a welded joint is placed in principle because fracture mechanics assumes homogenous material, not only around the crack tip but on a distance ...
Repair Welding Of Lower Rails Of A 30CrMoV9 Steel Transport Beam And The Conditions Under Which The Welding Procedure Must Be Carried Out
(Proceedings of the 5th International Scientific Conference on Advances in Mechanical Engineering (ISCAME 2017), 2017)
Welding technology used for repairing of the lower rail of a 30CrMoV9 steel transport beam is
presented in this paper. Following the previously performed repair welding, a large number of
cracks were detected, located ...
The influence of the temperature and exploitation time on the behaviour of a welded joint subjected to variable and impact load
(International Conference on New Trends in Fatigue and Fracture, 2018)
This paper presents the analysis of the temperature and exploitation time influence on the resistant measure to brittle fracture of welded joint constituents of the new and exploited low-alloyed Cr-Mo steel A-387 Gr. B ...