Претраживање
Приказ резултата 1-10 од 12
Influence of second-phase particles on fracture behavior of PLA and advanced PLA-X material
(Elsevier Science Bv, Amsterdam, 2021)
Most widespread materials in Additive Manufacturing are PLA (PolyLactic Acid) and ABS (Acrylonitrile Butadiene Styrene), which are dissimilar materials in terms of printing abilities and mechanical properties. PLA material ...
Effect of Infill Type and Density on Tensile Properties of PLA Material for FDM Process
(DAAAM International, 2019)
Fused deposition modeling (FDM) is a rapidly growing additive manufacturing technology for various applications in
field of engineering. Mechanical properties of 3D printed materials in FDM technology depend on various ...
Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer
(Elsevier B.V., 2022)
The majority of manufacturers of polymer filaments for FDM technology rely their datasheets only on tensile tests, so their documentation usually lacks any data concerning fracture mechanics parameters. Having in mind the ...
Layer thickness influence on impact properties of FDM printed PLA material
(Elsevier, 2024)
Polylactic Acid (PLA) is a widely used material in Fused Deposition Modeling (FDM) technology. Additive Manufacturing (AM) parameters are known to have an influence on the mechanical properties of final components. In FDM, ...
Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material
(Elsevier, Amsterdam, 2020)
FDM is a commercially widespread 3D printing technology which uses thermoplastic materials for building prototypes and functional parts. Most used materials in this technology are PLA (PolyLactic Acid) and ABS (Acrylonitrile ...
Influence of printing parameters on dimensional stability of SENB specimens made from PLA and PLA-X materials
(University of Belgrade, faculty of Mechanical Engineering, 2021)
The subject of this paper is to show how two similar materials, namely PLA and PLA-X, influence on
geometrical properties of additively manufactured SENB (Single-Edge Notched Bending) specimens.
Observed geometrical ...
Analysis of the materials usability in additive production technologies
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Nowadays it is in growing usage of additive production technologies, especially the FDM (Fused Deposition
Modeling) method. The most commonly used materials in 3D printing are ABS (Acrylonitrile butadiene styrene)
and ...
Experimental determination of type of fracture PLA specimens in the function of printing conditions
(Innovation Center of Faculty of Mechanical Engineering, 2019)
Fused Filament Fabrication (FFF) represent one of the technologies to process polymer materials in the way
of rapid prototyping. Parts produced by this method not so rarely have good mechanical properties in the
tangential ...
Numerical analysis of PLA material orthopaedic plates
(International conference of experimental and numerical investigations and new technologies (2022 ; Zlatibor), 2022)
Additive Manufacturing (AM) provides many applications in different high-demand engineering fields, i.e., automotive, aeronautical and biomedical fields. For biomedical applications, biodegradable thermoplastics, such as ...
Influence of Material Colour on Mechanical Properties of PLA Material in FDM Technology
(DAAAM International, 2019)
Today, one of the most used material in FDM (fused deposition modelling) 3D printing technology is PLA (polylactic
acid). On market today, there are many different companies that producing PLA material filament for 3D ...