Претраживање
Приказ резултата 1-10 од 14
Fracture properties of multiphase alloy MP35N
(Elsevier Science Sa, Lausanne, 2003)
This paper addresses the fracture properties of commercially cold-drawn (53%) MP35N (35% Co, 35% Ni, 20% Cr, and 10% Mo) in both the cold-worked and the cold-worked and aged conditions. MP35N is a superalloy that exhibits ...
Balance of liquid-phase turbulence kinetic energy equation for bubble-train flow
(Atomic Energy Soc Japan, Tokyo, 2004)
In this paper the investigation of bubble-induced turbulence using direct numerical simulation (DNS) of bubbly two-phase flow is reported. DNS computations are performed for a bubble-driven liquid motion induced by a regular ...
Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams
(Elsevier Science Inc, New York, 2002)
In consideration of the very high energy consumption of drying processes it is astonishing and disadvantageous that the majority of industrial dryers are offered and operated without energy recovery. The avoidance of fouling ...
Design update, thermal and fluid dynamic analyses of the EU-HCPB TBM in vertical arrangement
(Elsevier Science Sa, Lausanne, 2009)
In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM) is developed in Forschungszentrum Karlsruhe (FZK) ...
Modelling of ductile fracture initiation in strength mismatched welded joint
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
In this paper, the effect of strength mismatch and width of the welded joints oil the stress-strain distribution in the crack tip region has been discussed. The single-edge notched bend (SENB) specimens (precrack length ...
A computer code for the prediction of mill gases and hot air distribution between burners' sections at the utility boiler
(Pergamon-Elsevier Science Ltd, Oxford, 2008)
One of the main tasks during the design or simulation and analyses of the utility steam boiler operation is the prediction of a distribution of mill gases and hot air flow rates between burners' sections. These are the ...
Thermal-hydraulic analysis of a steam boiler with rifled evaporating tubes
(Pergamon-Elsevier Science Ltd, Oxford, 2007)
Rifled evaporating tubes are applied in the steam boilers with the aim to increase the steam-water mixture turbulization and to prevent the burnout of tubes walls. The rifled evaporating tubes and the working fluid forced ...
Efficient helium cooling methods for nuclear fusion devices: Status and prospects
(Elsevier Science Sa, Lausanne, 2009)
Helium-cooled reactors offer several important advantages as the helium is an inert and neutron transparent gas. compatible with high outlet temperatures and all structural and functional materials considered for plasma ...
Plane strain fracture toughness of MP35N in aged and unaged conditions measured using modified CT specimens
(Elsevier Science Sa, Lausanne, 2003)
The multiphase alloy MP35N (35% Ni, 35% Co, 10% Mo, 20% Cr) is a high strength, high toughness alloy of choice for several safety-critical applications in aerospace, oil drilling, and biomedical industries. Several previous ...
Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
Local brittle zones (LBZ) cause the unstable fracture behaviour of weld metals. This threatens the safe service of welded structures and makes structural assessment procedures difficult. Therefore, the unstable fracture ...