Претраживање
Приказ резултата 1-10 од 49
Integrity and Life Assessment Procedure for a Reactor
(Elsevier Science Bv, Amsterdam, 2019)
Integrity and life assessment of structural elements or structures subjected to variable loads is necessary in order to define the control interval and removal of damages that occurred during exploitation. Integrity and ...
Risk based analysis of temperature and time effects on brittle fracture of A-387 Gr. B welded joint
(Elsevier Science Bv, Amsterdam, 2019)
Risk based analysis of temperature and time effects on fracture toughness values is applied to different regions of a welded joint made of low-alloyed Cr-Mo steel A-387 Gr. B, designed for high temperature applications. ...
Relation between impact and fracture toughness of A-387 Gr. B welded joint
(Elsevier Science Bv, Amsterdam, 2019)
The influence of temperature on impact and fracture toughness values in different regions of a welded joint is analysed for low-alloyed Cr-Mo steel A-387 Gr. B, designed for high temperature applications. Standard Charpy ...
Application of Numerical Methods in Design and Analysis of Orthopedic Implant Integrity
(Springer International Publishing Ag, Cham, 2019)
In this paper a numerical analysis of hip implant model and hip implant model with a crack in a biomaterial is presented. Hip implants still exhibit problem of premature failure, promoting their integrity and life at the ...
Influence of temperature on fracture toughness values in different regions of A-387 Gr. B welded joint
(Elsevier Science Bv, Amsterdam, 2019)
The influence of temperature on fracture toughness values in different regions of a welded joint is analysed low-alloyed Cr-Mo steel A-387 Gr. B, designed for high temperature applications. Heterogeneity of microstructure ...
Mechanical properties of surfaces studied by atomic force microscope
(Czech Technical University, 2019)
Experimental determining of fracture behaviour of P460NL1 steel welded joint specimens
(Elsevier Science Bv, Amsterdam, 2019)
This paper is focused on the experimental measuring of impact energy as a part of the doctoral dissertation involving the fatigue behaviour of welded joints, made of fine grain normalised micro-alloyed low carbon high ...
Thermal and Mechanical Characteristics of Dual Cure Self-etching, Self-adhesive Resin Based Cement
(Springer International Publishing Ag, Cham, 2019)
One of the main objectives in research and development of resin based cements (RBCs) is to enhance their clinical longevity and ease of use. In spite of the undeniable technological advances introduced in the last few ...
Indirect approach of measuring the axial force on turbo-jet engine rotor
(Elsevier Ltd, 2019)
This paper describes a new approach for measuring the axial force on a turbo-jet engine rotor from the Phoenix family. The axial force occurs due to pressure distribution from the operating fluid along the surfaces of the ...
Upgrade of the thermal power plant flexibility by the steam accumulator
(Silesian University of Technology (PolSL), 2019)
Thermal power plants are forced to operate under frequent load changes in energy
systems with increased share of solar and wind power plants. These load changes
increase thermal power plant aging and reduce their ...