Search
Now showing items 1-10 of 11
Numerička analiza loma zatezne epruvete sa prslinom u ZUT / Numerical analysis of tensile specimen fracture with crack in HAZ
(Kluwer Academic Publishers, 2006)
Numeričkim rešenjima se omogućava istraživanje složenijih problema, uključujući analizu pojedinačnih uticaja, posebno u slučajevima kada izostaju odgovarajući eksperimenti i matematička rešenja usled visoke cene, složenosti ...
The effect of annealing temperatures and cooling rates on microstructure and mechanical properties of investment cast Ti-6Al-4V alloy
(Elsevier Sci Ltd, Oxford, 2006)
Production of investment castings of titanium alloys was considerably increased during last years due to the significant cost savings compared to complicated machined parts. However, the disadvantage of as-cast titanium ...
Structural integrity assessment by local approach to fracture
(Kluwer Academic Publishers, 2006)
The austempering study of alloyed ductile iron
(Elsevier Sci Ltd, Oxford, 2006)
Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can ...
Case study of supporting tubes failure
(Kluwer Academic Publishers, 2006)
Fracture toughness of alloyed austempered ductile iron (ADI)
(Kluwer Academic Publishers, 2006)
Some aspects of engineering approach to structural integrity assessment
(Kluwer Academic Publishers, 2006)
Heat Exchanger for Vehicles
(United States Patent Office, 2006)
The invention relates to a heat exchanger for vehicles. For a new generation of heat exchangers based on carbon dioxide at high pressure, the burst pressure requirements of the heat exchanger assemblies for reasons of ...
Ductile fracture prediction of steam pipeline steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
Considering the conditions to which steels used for the manufacture of steam pipelines are exposed, the micromechanism of their destruction in exploitation is exclusively the ductile one. In order to make an estimation of ...
Microstructure and fracture of alloyed austempered ductile iron
(Elsevier Science Inc, New York, 2006)
An investigation has been conducted on two austempered ductile irons alloyed with Cu and Cu+Ni, austenitized at 900 degrees C and austempered at 350 degrees C. The microstructure and fracture mode developed through these ...