Претраживање
Приказ резултата 21-30 од 75
Workspace design for crane cabins applying a combined traditional approach and the Taguchi method for design of experiments
(Taylor & Francis Ltd, Abingdon, 2016)
Procedures in the development process of crane cabins are arbitrary and subjective. Since approximately 42% of incidents in the construction industry are linked to them, there is a need to collect fresh anthropometric data ...
Digital Image Correlation Analysis of Vertically Loaded Cylindrical Ti-Implants With Straight and Angled Abutments
(Springer, New York, 2016)
The purpose of this study was to investigate the influence of the abutment angulation upon the strain distribution pattern for the vertical loading situation by means of the digital image correlation (DIC) method. In ...
A Heat Conduction and Convection Analytical Benchmark for Adjoint Solution Verification of Computational Fluid Dynamics Codes Used in Reactor Design
(Amer Nuclear Soc, La Grange Pk, 2016)
This work presents a heat transport benchmark problem when modeling the steady-state radial conduction in a fuel rod coupled to the axial heat convection in a coolant surrounding the rod and flowing along it. This benchmark ...
Ductile fracture prediction of steam pipeline steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
Considering the conditions to which steels used for the manufacture of steam pipelines are exposed, the micromechanism of their destruction in exploitation is exclusively the ductile one. In order to make an estimation of ...
Analysis of the nominal load effects on gear load capacity using the finite-element method
(Sage Publications Ltd, London, 2010)
This research investigates the effects of the nominal load value on load distribution of simultaneously meshing gear teeth pairs, and on the involute gear load capacity. The research results presented in this article confirm ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
Mathematical modeling and experimental investigation of a composite beam failure - Case study
(London : Sage Publications Ltd, 2023)
Composite materials have been extensively employed in the aviation industry in recent years. The application of new materials enables significant weight savings with improved mechanical characteristics. This is also very ...
Assessing the forest management in the Novi Pazar region (Southwest Serbia)
(FRESENIUS ENVIRONMENTAL BULLETIN, 2022)
To address the question of weather stands are managed sustainably in the Novi Pazar region (Southwest Serbia), this study compares the quantity of standing wood biomass in the Debeljak-Medenovac unit at the beginning and ...
Contemporary Maintenance Management of Power Plant Life Exhaustion Components
(Technics Technologies Education Management, 2010)
Reliability centered maintenance (RCM) has a key role in the quality system of thermal power plants. Electricity production is definitely not only production of a product, but also becomes a customer service. Reliability ...
An Approach to the Optimization of a Thin-walled Z-beam
(Strojniski Vestnik/Journal of Mechanical Engineering, 2009)
One approach to the optimization of a thin-walled open section Z-beam subjected to bending and to the constrained torsion is considered. For given loads, material and geometrical characteristics the problem is reduced to ...