Pretraživanje
Prikaz rezultata 31-40 od 79
Bucket chain excavator: Failure analysis and redesign of the counterweight boom supporting truss columns
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
The supporting truss of the counterweight boom is a vital part of the bucket chain excavator's (BCE) superstructure. The occurrence and propagation of cracks in the supporting truss columns' heads may lead to BCE collapse. ...
Design update, thermal and fluid dynamic analyses of the EU-HCPB TBM in vertical arrangement
(Elsevier Science Sa, Lausanne, 2009)
In the frame of the activities of the EU Breeder Blanket Programme and of the Test Blanket Working Group of ITER, the Helium Cooled Pebble Bed Test Blanket Module (HCPB TBM) is developed in Forschungszentrum Karlsruhe (FZK) ...
Mock-up testing facilities and qualification strategy for EU ITER TBMs
(Elsevier Science Sa, Lausanne, 2010)
European test blanket modules (TBM) for both European blanket concepts, namely the Helium Cooled Lithium Lead (HCLL) and the Helium Cooled Pebble Bed (HCPB), and their auxiliary systems have been designed in the last years. ...
Failure analysis of the combat jet aircraft rudder shaft
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This paper analyzes failure causes of the combat jet aircraft rudder shaft (RS) which occurred during the flight mission. A finite element method (FEM), utilized to determine the stress state of the RS subjected to hinge ...
Experimental investigations of flow distribution in coolant system of Helium-Cooled-Pebble-Bed Test Blanket Module
(Elsevier Science Sa, Lausanne, 2016)
This paper deals with investigations of flow distribution in the coolant system of the Helium-Cooled Pebble -Bed Test Blanket Module (HCPB TBM) for ITER. The investigations have been performed by manufacturing and testing ...
Creep crack growth properties of P91 and P22 welded joints
(Wiley, Hoboken, 2017)
The ferritic P22 and bainitic-martenstic P91 steel welded joints operating at elevated temperatures are highly vulnerable to premature failure, because microstructure gradients can lead to cracking in the heat-affected ...
Stringer effect on fatigue crack propagation in A2024-T351 aluminum alloy welded joint
(Elsevier Sci Ltd, Oxford, 2017)
This paper describes fatigue crack growth in a friction stir welded T joints made of aluminum alloy A2024-T351 under three point bending loads. For this purpose, three dimensional homogeneous isotropic model is used to ...
Ductile fracture of pipe-ring notched bend specimens - Micromechanical analysis
(Pergamon-Elsevier Science Ltd, Oxford, 2017)
Integrity of pipes is typically assessed by testing fracture mechanics specimens, such as compact tensile (CT) or single-edge notched bending (SENB). However, for some pipe dimensions it is not easy or possible to fabricate ...
Influence of welded joint microstructures on fatigue behaviour of specimens with a notch in the heat affected zone
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper, the results of determining the Paris law coefficients, C and m, are presented, based on the experimental data obtained by three-point bending testing of 8 welded joint specimens. The specimens were taken ...
Utilization of waste ceramics and roof tiles for radionuclide sorption
(Inst Chemical Engineers, Rugby, 2017)
The possible utilization of waste ceramic (CT) and roof tiles (RT), as sorbents for liquid radioactive waste (LRW) treatment, was investigated. Following the European directives on waste and politics of saving natural raw ...