Претраживање
Приказ резултата 21-30 од 39
Temperature and moisture distributions inside the layer of moist material placed on hot isothermal surface
(Inzhenerno-Fizicheskii Zhurnal, 2001)
The problem of contact drying of a layer of moist material placed on a hot isothermal surface is considered. A system of heat and mass transfer equations and equations for the initial and boundary conditions are proposed. ...
Strength, toughness and structural integrity of storage tanks in urban environment
(Welding Research Council, 2003)
Urban development requires the application of different kind of storage tanks for liquid and gaseous fluids, which can also be hazardous and detrimental. In order to prevent the leakage and, eventually, catastrophic failure ...
Crystallographic orientations of Ni3Al-based aluminide
(Elsevier Science Inc, New York, 2000)
Inverse pole figures have been plotted to determine preferred crystallographic orientations in a powder-compacted Ni3Al aluminide prealloyed with Fe, Ti and B. The main textural components, although weak, were noticeably ...
Heat pump supplemental heating system for motor vehicles
(Sage Publications Ltd, London, 2004)
The paper deals with the importance of supplemental heating of motor vehicles and the possibilities of automotive heat pump system utilization. A prototype heat pump system for motor vehicles has been developed, built in ...
Micromechanical coupled study of crack growth initiation criterion in Pressure vessel steel
(Problemy Prochnosti, 2004)
We present results of the combined design-theoretical investigation of the mechanism of crack growth at the onset of ductile fracture of NPP reactor pressure vessels. Micromechanical approach to the prediction of ductile ...
Analysis of the unstable fracture behaviour of a high strength low alloy steel weldment
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
Local brittle zones (LBZ) cause the unstable fracture behaviour of weld metals. This threatens the safe service of welded structures and makes structural assessment procedures difficult. Therefore, the unstable fracture ...
The influence of microstructure on ductile fracture initiation in low-alloyed steel
(Trans Tech Publications Ltd, Durnten-Zurich, 2004)
In this paper the quantitative microstructural analysis of low-alloyed pressure vessel steel has been discussed. The values of volume fraction and mean free path of non-metallic inclusions determined in that way were used ...
Plane strain fracture toughness of MP35N in aged and unaged conditions measured using modified CT specimens
(Elsevier Science Sa, Lausanne, 2003)
The multiphase alloy MP35N (35% Ni, 35% Co, 10% Mo, 20% Cr) is a high strength, high toughness alloy of choice for several safety-critical applications in aerospace, oil drilling, and biomedical industries. Several previous ...
Group theoretical formulation of quadrilateral and hexahedral isoparametric finite elements
(Pergamon-Elsevier Science Ltd, Oxford, 2004)
The group supermatrix procedure, developed by Zlokovic, is applied for derivation of stiffness matrices of quadrilateral and hexahedral isoparametric finite elements using the symmetry groups C-2v and D-2h respectively. ...
Formation of fouling layers on a heat exchanger element exposed to warm, humid and solid loaded air streams
(Elsevier Science Inc, New York, 2002)
In consideration of the very high energy consumption of drying processes it is astonishing and disadvantageous that the majority of industrial dryers are offered and operated without energy recovery. The avoidance of fouling ...