Претраживање
Приказ резултата 11-20 од 96
SIZE EFFECT ASSESSMENT OF KJc EXPERIMENTAL DATA USING THE TWO-STEP-SCALING METHOD
(Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“, Institut za ispitivanje materijala (IMS), Beograd, 2023)
The phenomenon of ductile-to-brittle transition (DBT) in ferritic steels, widely used in design of nuclear reactor pressure vessels, has been a pervasive semi-centennial research topic. Due to the extremely pronounced ...
Ductile-to-brittle transition of ferritic steels: A historical sketch and some recent trends
(Engineering Fracture Mechanics, 2023)
The phenomenon of ductile-to-brittle transition in ferritic steels has been a ubiquitous research challenge for the last 50 years. The characterization of this problem using the fracture mechanics concept, from the earliest ...
INSPECTION OF DAMAGE AND RISK ANALYSIS OF CONTAINERS IN A COAL DRYING FACILITY IN EXPLOITATION
(Društvo za integritet i vek konstrukcija „Prof. dr Stojan Sedmak“, Institut za ispitivanje materijala (IMS), Beograd, 2023)
Risk analysis of containers in a coal drying facility was performed using the Failure Modes and Effects Analysis (FMEA) method in combination with the risk matrix. The selected exploitation period analysed for all vessels ...
Flexibility of power generation and possibilities for feasible upgrades of coal power plants: a case of the Electric Power Industry of Serbia
(Beograd : Društvo termičara Srbije, 2023)
This paper deals with current status and possibilities for feasible improvement of the flexibility of power generation fleet consisting of aged coal-fired power plants and hydro power plants. The analyses are done by use ...
Small watercourses and strategic management of their use through environmental and social impacts
(Academy of Sciences and Arts of the Republic of Srpska, 2023)
Mountain areas are usually rich in watercourses, which are a
significant resource of every country. They are typically torrential in their most
upstream part and can cause extensive damage to downstream landscapes. ...
The influence of print orientation and print location on the mechanical characteristics of specimens obtained by SLS technology
(Serbian Ceramic Society, 2023)
SLS technology has become popular in various industries due to its ability to produce
complex components with less effort than traditional methods. The study used PA 12, a
commonly used material in SLS printing, to create ...
Structural integrity analysis of a hip implant with a ceramic-ceramic sliding surface
(Serbian Ceramic Society, 2023)
New types of protective coatings and development of test methods
(Structural integrity and life, 2023)
The paper presents the results of synthesis and charac-terisation of refractory coatings based on various fillers intended for the protection of metallic structures. Refractory fillers applied are based on mullite, cordierite, ...
Printing orientation influence on tensile strength of PA12 specimens obtained by SLS
(Springer, 2023)
Selective laser sintering (SLS) is one of the additive manufacturing technologies dedicated to the production of high-quality parts with complex geometries. Here, polyamide 12 (PA12) is a commonly used material, for ...
An approach for automatic free form surface milling machining technology design
(UNIVERSITY OF NOVI SAD, FACULTY OF TECHNICAL SCIENCES, 2023)
Parts with free form surfaces are commonly used in wide area of engineering, not only in mechanical
engineering. When it comes to the area of mechanical engineering, the main problem is how to produce such
parts. One of ...