Претраживање
Приказ резултата 21-30 од 223
Failure prediction of gas and oil drilling rig pipelines with axial defects
(Elsevier Science Bv, Amsterdam, 2014)
Working conditions of casing pipes in drilling rigs can significantly influence the initiation and development of damage in the material, and therefore also the safe service of the entire system. In this work, an integrity ...
Numerical modeling of austenite-ferrite weldment tensile test
(Elsevier Science Bv, Amsterdam, 2014)
The aim of this paper was to numerically simulate the plastic behavior of a three-material body specimen and compare the results with physical experiments performed on the same specimen. Both the physical and numerical ...
Design and testing characteristics of thin stainless steel diaphragms
(Elsevier Science Bv, Amsterdam, 2018)
Metal membranes are defined as thin steel circular plates. The metal membranes are widely used in the measurement technique and they are constantly loaded over the entire surface. In case that a membrane is loaded with ...
The development and application of the new methodology for conveyor idlers fits testing
(Elsevier Science Bv, Amsterdam, 2018)
The proper interference fit between the joined parts is a prerequisite for an effective pressure joint. The main purpose of the pressure joint is to transfer tangential, radial and axial loads between the joined parts. In ...
Effects of welding technology on the occurrence of fracture in welded joints
(Elsevier Science Bv, Amsterdam, 2018)
Welded joints represent locations where failure is most likely to occur in welded structures. Welded joint failure depends on their vulnerability to crack initiation and growth. These factors are significantly influenced ...
Analysis of the effect of implant distance from the surrounding structure, in the PMMA block model
(Elsevier Science Bv, Amsterdam, 2016)
Strain analysis in the vicinity of the dental implants were the subject of many research papers. In this study, new experimental method was employed for strain determination in the surrounding area of the axially loaded ...
Oxidation behavior during prolonged service of boiler tubes made of 2.25Cr1Mo and 12Cr1Mo0.3V heat resistance steels
(Elsevier Science Bv, Amsterdam, 2016)
During service of thermal power plant (TPP) units, different components are exposed to high temperature due to technological cycle of TPP unit. Service lifetimes of these components, especially boiler heating surfaces, may ...
Model analysis of complex structures - advantages of physical sub-scaled model testing and shortcomings in physical model production
(Elsevier Science Bv, Amsterdam, 2018)
The possibilities of testing real constructions strength are often limited, especially in case of large constructions. Testing on the model, instead of the actual construction, results in a great saving of money and time. ...
Development of numerical-experimental model of connecting lugs and application on the lugs calculation of container terminals
(Elsevier Science Bv, Amsterdam, 2018)
The present paper describes numerical and experimental methodology and development of the model for stress and deformation state analysis of the connecting lug of container terminals. Numerical analysis was conducted by ...
Structural integrity of butt welded connection after fire exposure
(Elsevier Science Bv, Amsterdam, 2018)
The paper presents a study for fire behavior of the butt-welded joints subjected to low cycle fatigue loading, taken into account the post fire conditions and the possibility of welding strengthening. The need of in service ...