Претраживање
Приказ резултата 11-20 од 81
Loading Rate Effects on MOE and MOR Distributions in Testing of Small Clear Beech Wood Specimens
(North Carolina State Univ Dept Wood & Paper Sci, Raleigh, 2022)
Distributions of the modulus of elasticity (MOE) and modulus of rupture (MOR) were characterized at three loading rates for small clear beech specimens in static bending. The correlation between MOE and MOR for all three ...
Structural integrity and life assessment of oil drilling rig pipes using analytical method
(Institut za ispitivanje materijala, Beograd, 2022)
Structural integrity and life assessment of oil rig pipes using analytical method is presented and applied to an oil drilling rig pipe. The new concept based on risk evaluation according to probability and consequence of ...
Creating a Novel Mathematical Model of the Kv10.1 Ion Channel and Controlling Channel Activity with Nanoelectromechanical Systems
(MDPI, Basel, 2022)
Featured Application Nanoelectromechanical systems and nanorobots can be used to treat cancers associated with the Kv10.1 voltage-gated ion channel activity. The Kv10.1 model was developed by applying the control engineering ...
Microstructure and fracture mode of unalloyed dual-phase austempered ductile iron
(Savez hemijskih inženjera, Beograd, 2022)
Dual-phase ADI material microstructure consists of different amounts and morphologies of ausferrite and free ferrite, obtained by subjecting ductile iron to specific heat treatment. Its strength is lower compared to ...
Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)
(MDPI, Basel, 2022)
In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical ...
The Effect of Material Heterogeneity and Temperature on Impact Toughness and Fracture Resistance of SA-387 Gr. 91 Welded Joints
(MDPI, Basel, 2022)
This paper presents the analysis of the behavior of welded joints made of 9-12% Cr-Mo steel SA-387 Gr. 91. The successful application of this steel depends not only on the base metal's (BM) properties but even more on ...
Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer
(Elsevier B.V., 2022)
The majority of manufacturers of polymer filaments for FDM technology rely their datasheets only on tensile tests, so their documentation usually lacks any data concerning fracture mechanics parameters. Having in mind the ...
Ion Channel Modeling beyond State of the Art: A Comparison with a System Theory-Based Model of the Shaker-Related Voltage-Gated Potassium Channel Kv1.1
(MDPI, Basel, 2022)
The mathematical modeling of ion channel kinetics is an important tool for studying the electrophysiological mechanisms of the nerves, heart, or cancer, from a single cell to an organ. Common approaches use either a ...
Contribution to the investigation of the influence of tire non-uniformity on the lateral tire characteristics
(Institut za istraživanja i projektovanja u privredi, Beograd, 2022)
Tire models are widely used in research in the field of vehicle dynamics and noise, and especially in the simulation of their movement under the action of forces and moments. In general case, we distinguish theoretical ...
Experimental and numerical stress and strain analysis of the boiler reversing chamber tube plate
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2022)
Boilers are one of the most used units for both heat generation plants and industry systems. Their operation is subjected to different working loads and maintenance requirements. Exploitation experience points out critical ...