Претраживање
Приказ резултата 1-10 од 17
The Effect of Vanadium Content on Microstructure and Impact Toughness of Forged High Alloy Steel X96CrMo12-1
(Springer International Publishing Ag, Cham, 2019)
The aim of this research was to examine the influence of vanadium on the structure and impact toughness of the forged high alloy steel X96CrMo12-1. It is known that vanadium affects the process of solidification of this ...
Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks
(Institut za ispitivanje materijala, Beograd, 2018)
Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In ...
External atmospheric influences on the mechanical properties of resin-bonded grinding wheels with aluminium oxide and silicon carbide grains
(Institut za ispitivanje materijala, Beograd, 2020)
Ageing effects on resin-bonded grinding wheel properties are presented, including aluminium oxide and silicon carbide influence. Furthermore, humidity is examined as the most likely cause of significant downgrade in ...
The austempering study of alloyed ductile iron
(Elsevier Sci Ltd, Oxford, 2006)
Austempered ductile iron (ADI) proved to be an excellent material as it possesses attractive properties: high strength, ductility and toughness are combined with good wear resistance and machinability. These properties can ...
Effect of microstructure on tensile properties of austenite-ferrite welded joint
(Faculty of Metallurgy, 2015)
Complex microstructure of austenite-ferrite welded joint has been investigated, focused on its influence on Focal tensile properties. Tensile properties (yield strength and hardening coefficient) have been evaluated by ...
Study of the simulated heat affected zone of creep resistant 9-12% advanced chromium steel
(Taylor & Francis Inc, Philadelphia, 2008)
Global warming leads to research-development attempts worldwide with a view to reduce CO2 emission. Therefore, in the energy supply sector, a special focus has been directed to further development of steels that can endure ...
Transition temperature and fracture mode of as-castand austempered ductile iron
(Wiley, Hoboken, 2008)
The ductile to brittle transition temperature is a very important criterion that is used for selection of materials in some applications, especially in low-temperature conditions. For that reason, in this paper transition ...
The effect of cracks on stress state in crane wheel hard-surface under contact loading
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
Shown in this paper are the results of microstructure testing of crane wheels, along with the repair welding procedure performed by hard-surfacing. Repair welding involved the application of a welded layer to the crane ...
Selection of the most appropriate welding technology for hardfacing of bucket teeth
(Institute of Metals Technology, 2015)
A possibility of extending the service life of the working parts of construction machinery with particular attention to hardfacing of loader bucket teeth was investigated. In the first part of this paper the tribological ...
Impact Toughness of Friction Stir Welded Al-Mg Alloy
(Carl Hanser Verlag, Munich, 2014)
Al-Mg 5083 alloy was friction stir welded by varying welding variables, i.e., rotational speed, traversal speed and tool tilt angle. Welded specimens have been tested by the instrumented Charpy test to evaluate total ...