Претраживање
Приказ резултата 41-50 од 54
Corrigendum to “A scaling approach to size effect modeling of Jc CDF for 20MnMoNi55 reactor steel in transition temperature region”
(Engineering Failure Analysis, 2022)
Thermal analysis and phase changes of mechanochemically activated sodium carbonate
(Elsevier, Amsterdam, 2022)
Sodium carbonate is a well-known material for being used as a good sorbent of carbon dioxide from the atmosphere, and as such has gained increasing importance in environmental protection. In order to enhance its sorption ...
Corrosion effects on structural integrity and life of oil rig drill pipes
(Savez hemijskih inženjera, Beograd, 2022)
Corrosion effects on structural integrity and life of oil rig welded pipes are analysed by experimental, analytical, and numerical methods. Experiments were performed using standard tensile specimens and CT specimens for ...
Fatigue crack growth in locking compression plates
(Elsevier Sci Ltd, Oxford, 2022)
Fatigue crack growth in orthopaedic locking compression plates (LCP), under four-point bending, has been simulated by the extended finite element method (xFEM) to assess LCP optimal geometry in respect to remaining life. ...
Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)
(MDPI, Basel, 2022)
In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical ...
A scaling approach to size effect modeling of J(c) CDF for 20MnMoNi55 reactor steel in transition temperature region
(Pergamon-Elsevier Science Ltd, Oxford, 2022)
Ever since the 1980s there is a sustained interest in the size effect, as one of the most pronounced consequences of fracture mechanics. In the present study, the investigation of the size effect is focused on estimation ...
Loading Rate Effects on MOE and MOR Distributions in Testing of Small Clear Beech Wood Specimens
(North Carolina State Univ Dept Wood & Paper Sci, Raleigh, 2022)
Distributions of the modulus of elasticity (MOE) and modulus of rupture (MOR) were characterized at three loading rates for small clear beech specimens in static bending. The correlation between MOE and MOR for all three ...
Experimental and numerical stress and strain analysis of the boiler reversing chamber tube plate
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2022)
Boilers are one of the most used units for both heat generation plants and industry systems. Their operation is subjected to different working loads and maintenance requirements. Exploitation experience points out critical ...
Thermo-mechanical analysis of linear welding stage in friction stir welding influence of welding parameters
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2022)
The influence of friction stir welding parameters on thermo-mechanical behav-ior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are ...
Experimental and numerical investigation of Ti-6Al-4V alloy behaviour under different exploitation conditions
(Society for Structural Integrity and LifeIMS Institute, 2022)
The paper involves experimental testing of titanium alloy Ti-6Al-4V specimens, based on which numerical models are made to provide the basis for further investigation. Due to the exploitation conditions these implants are ...