Претраживање
Приказ резултата 11-20 од 54
Contribution to the investigation of the influence of tire non-uniformity on the lateral tire characteristics
(Institut za istraživanja i projektovanja u privredi, Beograd, 2022)
Tire models are widely used in research in the field of vehicle dynamics and noise, and especially in the simulation of their movement under the action of forces and moments. In general case, we distinguish theoretical ...
Influence of the air pressure and oil amount to the temperature of the high-speed bearings lubricated by oil mist
(Emerald Group Publishing Ltd, Bingley, 2022)
Purpose The purpose of this paper is to improve the lubrication and remove as much as possible of the heat generated in the bearing assembly, embedded in the jet engine. Design/methodology/approach To determine the necessary ...
Experimental and numerical stress and strain analysis of the boiler reversing chamber tube plate
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2022)
Boilers are one of the most used units for both heat generation plants and industry systems. Their operation is subjected to different working loads and maintenance requirements. Exploitation experience points out critical ...
Thermo-mechanical analysis of linear welding stage in friction stir welding influence of welding parameters
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2022)
The influence of friction stir welding parameters on thermo-mechanical behav-ior of the material during welding is analyzed. An aluminum alloy is considered (Al 2024 T351), and different rotating and welding speeds are ...
Determination of Mechanical Properties of Epoxy Composite Materials Reinforced with Silicate Nanofillers Using Digital Image Correlation (DIC)
(MDPI, Basel, 2022)
In this study, silicate nanofillers; dicalcium silicate, magnesium silicate, tricalcium silicate, and wollastonite; were synthesized using four different methods and incorporated into the epoxy resin to improve its mechanical ...
The Effect of Material Heterogeneity and Temperature on Impact Toughness and Fracture Resistance of SA-387 Gr. 91 Welded Joints
(MDPI, Basel, 2022)
This paper presents the analysis of the behavior of welded joints made of 9-12% Cr-Mo steel SA-387 Gr. 91. The successful application of this steel depends not only on the base metal's (BM) properties but even more on ...
Povećanje energetske efikasnosti parnog bloka iskorišćenjem otpadne toplote dimnog gasa
(Beograd : Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS), 2022)
Structural integrity and life assessment of oil drilling rig pipes using analytical method
(Institut za ispitivanje materijala, Beograd, 2022)
Structural integrity and life assessment of oil rig pipes using analytical method is presented and applied to an oil drilling rig pipe. The new concept based on risk evaluation according to probability and consequence of ...
The effects of welded clips on fatigue crack growth in AA6156 T6 panels
(Elsevier Ltd, 2022)
Fatigue crack growth in different panels, made of AA6156 T6, was investigated experimentally and numerically. Three different types of panels were used, simple one, so-called base metal (BM), panel with 4 welded stringers ...
Promotion of Color Sorting in Industrial Systems Using a Deep Learning Algorithm
(MDPI, 2022)
Color sorting is a technological operation performed with the aim of classifying compliant and noncompliant agricultural products in large-capacity industrial systems for agricultural product processing. This paper ...