Претраживање
Приказ резултата 31-40 од 83
Non-homogeneity effect in the spherical shell by using seth's theory
(Institut za ispitivanje materijala, Beograd, 2017)
This paper presents nonlinear deformation behaviour of non-homogeneous spherical shell examined under pressure by using Seth's transition theory. It has been seen that for increased material compressibility in thickness ...
Numerical analysis of heat transfer during friction stir welding
(Institut za ispitivanje materijala, Beograd, 2017)
The paper deals with the heat input and maximum temperature that develops in friction stir welding with different welding parameters. The finite element method has been used for numerical analysis of temperature distribution ...
Low-temperature corrosion damage and repair of boiler bottom panel tubes
(Institut za ispitivanje materijala, Beograd, 2017)
The method used for repairing of the bottom panel of hot water boiler of 30 MW power, manufactured by Remming (a part of the 'Valjevo' Heating Plant) is presented in this paper along with the reasons why damage has occurred. ...
Remaining life determination for pressure vessel in a refinery
(Institut za ispitivanje materijala, Beograd, 2016)
Repair and inspection has been performed on a pressure vessel in the oil refinery for downstream treatment of crude oil in Iraq, without technical documentation. Two different approaches have given totally different results ...
Expectations, reality and perspectives in using bim for the green building design
(Institut za ispitivanje materijala, Beograd, 2017)
In the late 1970s when the first programs for building energy consumption simulation appeared, architectural practice was based on paper documentation and 2D drafting programs were considered as state of the art technologies. ...
Simulation of fatigue crack growth in a2024-t351 t-welded joint
(Institut za ispitivanje materijala, Beograd, 2017)
Fatigue crack growth in friction stir welded T joints under three point bending is simulated numerically using the Extended Finite Element Method (XFEM). Three point bending fatigue load stress is applied at the centre of ...
Strain field measurements of glass ionomer cement
(Institut za ispitivanje materijala, Beograd, 2019)
Extensive evolution of glass ionomer cements (GIC) has marked a significant shift in the practice of luting indirect dental restorations limiting the use of zinc-phosphate and zinc-polycarboxylate cements to a few indications. ...
Cavitation resistance of composite polyester resin/basalt powder
(Institut za ispitivanje materijala, Beograd, 2019)
The paper presents the results of research on cavitation resistance of the composite based on unsaturated polyester resin and basalt powder, as reinforcement. Basalt powder was obtained by grinding and micronising basaltic ...
Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks
(Institut za ispitivanje materijala, Beograd, 2018)
Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In ...
Failure analysis of bicycle frame composite structure based on stacking variant of laminate layers
(Institut za ispitivanje materijala, Beograd, 2020)
No matter what kind of bike the parts belong to (according to the requirements they need to meet), these parts are almost identical. The most complex bicycle part in the structural optimization for manufacture is a bicycle ...