Претраживање
Приказ резултата 1-10 од 12
Impact of Aging Effect and Heat Treatment on the Tensile Properties of PLA (Poly Lactic Acid) Printed Parts
(Revista Chimie Srl, Bucuresti, 2020)
Rapid innovations in 3D printing technology have allowed highly complex parts to be manufactured quickly and easily, particularly for prototyping purposes. Fused Deposition Modeling of thermoplastic materials is one of the ...
Influence of second-phase particles on fracture behavior of PLA and advanced PLA-X material
(Elsevier Science Bv, Amsterdam, 2021)
Most widespread materials in Additive Manufacturing are PLA (PolyLactic Acid) and ABS (Acrylonitrile Butadiene Styrene), which are dissimilar materials in terms of printing abilities and mechanical properties. PLA material ...
Influence of printing parameters on the eligibility of plane-strain fracture toughness results for PLA polymer
(Elsevier B.V., 2022)
The majority of manufacturers of polymer filaments for FDM technology rely their datasheets only on tensile tests, so their documentation usually lacks any data concerning fracture mechanics parameters. Having in mind the ...
Monitoring of fracture mechanics parameters on single edge notched tension specimens made of PLA material
(International conference of experimental and numerical investigations and new technologies (2021 ; Zlatibor), 2021)
In order to characterize the fracture toughness of single edge notched tension (SENT) specimens, this paper describes the experimental determination of fracture mechanics parameters such as crack mouth opening displacement ...
Printing parameter optimization of PLA material concerning geometrical accuracy and tensile properties relative to FDM process productivity
(Springer Nature, 2023)
High demand for part customization shifts industries toward AM technologies. Part customization in high-volume manufacturing is developed to its limits, whereas low-volume production using AM is still economically unjustified. ...
Additive technology design for 3D printing and application to fast product development
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Quality of produced part depends based on generated G-code for 3D printing. Nowdays, various softwares for
3D printing technology design are presented. In this parer is presented procedure from product design to
funcional ...
Comparative analysis of printing parameters effect on mechanical properties of natural PLA and advanced PLA-X material
(Elsevier, Amsterdam, 2020)
FDM is a commercially widespread 3D printing technology which uses thermoplastic materials for building prototypes and functional parts. Most used materials in this technology are PLA (PolyLactic Acid) and ABS (Acrylonitrile ...
Notch dimension discrepancy on SENB specimens fabricated from PLA and advanced PLA-X material
(20th International Colloqium on Mechanical Fatigue of Metals, 2021)
The subject of this paper is to experimentally investigate the geometrical properties of specimens obtained by Additive Manufacturing technology. Experimental tests were performed on SENB (Single Edge Notched Bending) ...
Influence of printing parameters on dimensional stability of SENB specimens made from PLA and PLA-X materials
(University of Belgrade, faculty of Mechanical Engineering, 2021)
The subject of this paper is to show how two similar materials, namely PLA and PLA-X, influence on
geometrical properties of additively manufactured SENB (Single-Edge Notched Bending) specimens.
Observed geometrical ...
Analysis of the materials usability in additive production technologies
(University of Belgrade, faculty of Mechanical Engineering, 2021)
Nowadays it is in growing usage of additive production technologies, especially the FDM (Fused Deposition
Modeling) method. The most commonly used materials in 3D printing are ABS (Acrylonitrile butadiene styrene)
and ...