Претраживање
Приказ резултата 21-30 од 31
Radionuclide Immobilization by Sorption onto Waste Concrete and Bricks-Experimental Design Methodology
(Springer International Publishing Ag, Cham, 2019)
The utilization of construction and demolition waste materials for the radionuclide immobilization by sorption processes was investigated. Given that the liquid radioactive waste usually has a complex composition and that ...
The Effect of Vanadium Content on Microstructure and Impact Toughness of Forged High Alloy Steel X96CrMo12-1
(Springer International Publishing Ag, Cham, 2019)
The aim of this research was to examine the influence of vanadium on the structure and impact toughness of the forged high alloy steel X96CrMo12-1. It is known that vanadium affects the process of solidification of this ...
Parametric optimization of the aluminium nanocomposites wear rate
(Springer Heidelberg, Heidelberg, 2019)
The optimization of wear rate of the nanocomposites with A356 aluminium alloy matrix, reinforced with silicon carbide nanoparticles, was performed through the analysis of the following influences: wt% of the reinforcement, ...
Effect of material heterogeneity and constraint conditions on ductile fracture resistance of welded joint zones - Micromechanical assessment
(Pergamon-Elsevier Science Ltd, Oxford, 2017)
The topic of this work is assessment of ductile fracture initiation and development in different zones of welded joint of a high strength low alloyed (HSLA) steel. A combined experimental-numerical procedure is applied for ...
CFD Calculation of Helicopter Tail Rotor Airloads for Fatigue Strength Experiments
(Asce-Amer Soc Civil Engineers, Reston, 2017)
This work focuses on defining loads and fatigue life estimation of helicopter tail rotor blades. The original metal construction of these blades was replaced with a new construction of blades made from composite materials. ...
Determining the crack acceptability in the welded joints of a wind loaded cylindrical steel shell structure
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
Engineering critical assessment can be considered as a mandatory request in the civil engineering designing and manufacturing process. The paper is presenting the procedure for determination of crack acceptability based ...
Influence of plasma spraying parameters on properties of thermal barrier coatings
(Taylor & Francis Ltd, Abingdon, 2013)
The aim of the present study is to investigate the influence of plasma spay deposition parameters on various properties of two standard thermal barrier coating (TBC) systems deposited on the steel substrate. Two TBC systems ...
High-temperature deformation behaviour of Ti3Al-11Nb intermetallic
(Carl Hanser Verlag, Munich, 2011)
A mechanism of high-temperature plasticity has been studied in terms of stress exponent and activation energy for deformation. A Ti3Al-based intermetallic was processed by hot-rolling in the two-phase field to accomplish ...
The Influence of Modifying Methods on the Quality of Eutectic and Hypereutectic Silumine for Diesel Engine Pistons
(International Journal of Cast Metals Research, 2013)
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, ...
Comparison of cavitation erosion behavior od cordierite and zircon based samples using image and morphological analyses
(Materials Letters, 2018)
In this study the resistance of cordierite and zircon to the cavitation erosion was investigated with the aim of possible spreading their application. Cavitation erosion test was applied using standard ultrasonic vibratory ...