Претраживање
Приказ резултата 1-10 од 29
Successful repair of cold cracks on treiber roll: case study
(Welding and Material Testing, 2022)
During preparing activities, as well as welding proces itself, it is necessary to strictly adhere to all relavant standards, programs and prescribed procedures. Experience can have a significant role for realization of ...
High temperature failures of metals
(Program and Book of abstracts of the 1st Intentational conference on innovativ materials in extreme conditions IMEC2022, 2022)
Influence of human factors on risk associated with pressure equipment
(Taylor & Francis Ltd, Abingdon, 2022)
Objectives. The analysis of previous research shows that indicators of human factors have not been sufficiently integrated into the models for risk assessment of pressure equipment to date. Therefore, the goal of this ...
Fatigue crack growth in locking compression plates
(Elsevier Sci Ltd, Oxford, 2022)
Fatigue crack growth in orthopaedic locking compression plates (LCP), under four-point bending, has been simulated by the extended finite element method (xFEM) to assess LCP optimal geometry in respect to remaining life. ...
Comparison of Tensile Properties of Carbon/Epoxy Composite Materials with Different Fiber Orientation Using Digital Image Correlation
(Springer Science and Business Media Deutschland GmbH, 2022)
Due to its remarkable qualities, carbon fiber epoxy composite sandwich panels are used in a variety of engineering applications. The goal of this research is to use tensile testing and a full-field non-contact 3D Digital ...
Influence of the air pressure and oil amount to the temperature of the high-speed bearings lubricated by oil mist
(Emerald Group Publishing Ltd, Bingley, 2022)
Purpose The purpose of this paper is to improve the lubrication and remove as much as possible of the heat generated in the bearing assembly, embedded in the jet engine. Design/methodology/approach To determine the necessary ...
Structural Integrity Analysis of a Kaplan Turbine Cover
(Elsevier Science Bv, Amsterdam, 2022)
During recent revitalization of Kaplan turbine aggregate made of structural steel St 3 (GOST standard), experimental investigation was performed. Base metal and welded joints were tested by non-destructive methods (NDT), ...
A scaling approach to size effect modeling of J(c) CDF for 20MnMoNi55 reactor steel in transition temperature region
(Pergamon-Elsevier Science Ltd, Oxford, 2022)
Ever since the 1980s there is a sustained interest in the size effect, as one of the most pronounced consequences of fracture mechanics. In the present study, the investigation of the size effect is focused on estimation ...
Numerical Simulation of Fatigue Crack Growth in Different Welded Joint Zones
(Springer Science and Business Media Deutschland GmbH, 2022)
This paper involves the numerical analysis of fatigue behaviour of welded joints made of steel SA-387 Gr. 91, with special attention devoted to its regions, which have very different mechanical and fatigue properties. ...
Povećanje energetske efikasnosti parnog bloka iskorišćenjem otpadne toplote dimnog gasa
(Beograd : Savez mašinskih i elektrotehničkih inženjera Srbije (SMEITS), 2022)