Pretraživanje
Prikaz rezultata 21-30 od 39
Indirect approach of measuring the axial force on turbo-jet engine rotor
(Elsevier Ltd, 2019)
This paper describes a new approach for measuring the axial force on a turbo-jet engine rotor from the Phoenix family. The axial force occurs due to pressure distribution from the operating fluid along the surfaces of the ...
Determination of Archard's wear coefficient and wear simulation of sliding bearings
(Emerald Group Publishing Ltd, Bingley, 2019)
Purpose This paper aims to present the methodology to determine Archard's wear coefficient. By applying this coefficient into the numerical simulation of wear, it is possible to predict wear without long lasting and usually ...
Fracture mechanics and fatigue crack propagation in armor steel welds
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
The welding process of armor steel is a complex process due to possible welding faults appearing in all zones of weld metal joint in the form of cracks and pores, as results of high percentage of carbon in the base metal. ...
Analysis of the strain and hardness in self-cured and light-cured self-adhesive resin based cement
(Taylor & Francis Ltd, Abingdon, 2019)
The study showed an application of the 3 D Digital Image Correlation Method (3 D-DIC) for detection of von Mises strain in samples of the self-etch, self-adhesive resin based cement (RBC). The aim was to determine and ...
Influence of welded joint microstructures on fatigue behaviour of specimens with a notch in the heat affected zone
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
In this paper, the results of determining the Paris law coefficients, C and m, are presented, based on the experimental data obtained by three-point bending testing of 8 welded joint specimens. The specimens were taken ...
Upgrade of the thermal power plant flexibility by the steam accumulator
(Silesian University of Technology (PolSL), 2019)
Thermal power plants are forced to operate under frequent load changes in energy
systems with increased share of solar and wind power plants. These load changes
increase thermal power plant aging and reduce their ...
XFEM simulation of fatigue crack growth in a welded joint of a pressure vessel with a reinforcement ring
(Springer, New York, 2019)
The numerical analysis of the behaviour of a pressure vessel with a reinforcement ring subjected to both static and dynamic load is presented in this paper. This research was based on a previous analysis which involved ...
The renewed TC12/ESIS technical committee - Risk analysis and safety of large structures and components
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
The ESIS Executive Committee decided to nominate a new team for the leadership and management of the TC12/ESIS technical committee (TC), as well as update the TC name as "Risk Analysis and Safety of Large Structures and ...
Guest editorial: Advanced design and fatigue assessment of structural components
(Wiley, Hoboken, 2019)
The synergistic action and interplay of hydrogen embrittlement mechanisms in steels and iron: Localized plasticity and decohesion
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Component failures due to the hydrogen embrittlement (HE) were observed in different industrial systems, including high-pressure hydrogen storage tanks, aircraft components, high-strength alloy components, and high-strength ...