Претраживање
Приказ резултата 11-20 од 132
Microstructure and cavitation behaviour of alloyed austempered ductile irons
(Taylor & Francis Ltd, Abingdon, 2018)
In this paper, the study of cavitation behaviour of austempered ductile iron (ADI) alloyed with copper, as well as copper and nickel with a fully ausferritic microstructure, is presented. The ADI materials used were ...
Stress Intensity Factors Evaluation at Tips of Multi-Site Cracks in Unstiffened 2024-T3 Aluminium Panel Using XFEM
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
The aim of this paper was to establish and demonstrate significant capacity and performances of extended finite element method (XFEM) to calculate stress intensity factors (SIFs) histories versus crack length for problems ...
Rapid evaluation of maintenance process using statistical process control and simulation
(Daaam International Vienna, Vienna, 2018)
There are successful and less successful maintenance systems (MS). As a dynamic category, the success of the maintenance function must be taken into consideration both for the present day and the future. This is the reason ...
Analysis of strain distribution in overmatching V groove weld using digital image correlation
(Elsevier Science Bv, Amsterdam, 2018)
Welded joints are treated as critical sites when constructing and calculating welded structures due to inhomogeneity and anisotropy of materials at the welded joint site. Because of the change in the geometry of the elements, ...
Permanent ground displacement across earthquake faults, landslides and natural slopes
(Elsevier Science Bv, Amsterdam, 2018)
Permanent ground displacement analysis methods, as very important aspect of the seismic dynamic analysis is explained in the paper. A methodology for probabilistic hazard assessment of permanent displacement across natural ...
Measuring the axial force on turbo-jet engine rotor
(DANUBIA Adria Symposium on Advances in Experimental Mechanics, 2018)
Crane cabins' interior space multivariate anthropometric modeling
(IOS Press, Amsterdam, 2018)
BACKGROUND: Previous research has shown that today's crane cabins fail to meet the needs of a large proportion of operators. Performance and financial losses and effects on safety should not be overlooked as well. OBJECTIVE: ...
Identification of Crack Initiation Cause in Pylons Construction of the Excavator SchRs630
(Univ Osijek, Tech Fac, Slavonski Brod, 2018)
A crack occurred on gusset plate of pylon vertical truss of bucket wheel excavator (BWE) SchRs630. Numerical calculation model of pylons, slewing platform and undercarriage was formed. Calculations are done using finite ...
Effect of temperature and exploitation time on tensile properties and plain strain fracture toughness, K-Ic, in a welded joint
(Elsevier Science Bv, Amsterdam, 2018)
Effect of temperature and exploitation time on resistance to brittle fracture of welded joint constituents of new and 40 years exploited low-alloyed Cr-Mo steel A-387 Gr. B has been analysed. The plane strain fracture ...
Design and testing characteristics of thin stainless steel diaphragms
(Elsevier Science Bv, Amsterdam, 2018)
Metal membranes are defined as thin steel circular plates. The metal membranes are widely used in the measurement technique and they are constantly loaded over the entire surface. In case that a membrane is loaded with ...