Претраживање
Приказ резултата 61-70 од 120
Expectations, reality and perspectives in using bim for the green building design
(Institut za ispitivanje materijala, Beograd, 2017)
In the late 1970s when the first programs for building energy consumption simulation appeared, architectural practice was based on paper documentation and 2D drafting programs were considered as state of the art technologies. ...
Possibilities of predicting the behaviour of ferrite-austenite welded joints in pressure equipment during exploitation
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
Exploitation safety of pressure equipment depends, among other factors, on the possibility of predicting the behaviour of each of its components during exploitation. If the safety of analysis is oriented towards materials ...
Cracking due to repair welding of the treiber roll
(Institut za ispitivanje materijala, Beograd, 2017)
Repair welding has caused crack initiation in the upper Treiber roll in the steel works plant mill at Zelezara in Smederevo. The upper and lower Treiber rolls serve the purpose of folding and directing rolled metal strips, ...
Measuring of Strain and Displacements in Welded Joints Subjected to Tensile Load Using Stereometric Methods
(Springer-Verlag Berlin, Berlin, 2017)
During the experimental testing of a welded joint, made of steel P460NL1, complete strain and displacement fields, which provide full insight into the behaviour of a welded joint under tensile load, were obtained using an ...
Complexity of Curved Glass Structures
(IOP Publishing Ltd, Bristol, 2017)
Despite the increasing number of research on the architectural structures of curvilinear forms and technological and practical improvement of the glass production observed over recent years, there is still a lack of ...
Creep crack growth - Comparison of two steel P91 and P22
(International Conference on Fracture, 2017)
The deformation and crack growth behaviour of P22 and P91 steel weldments tested at 550 °C and 600 °C, respectively,compact C(T) type specimens with sharp EDM starter notches in the base metal (BM) and heat affected zone ...
Polymeric biomaterials based on polylactide, chitosan and hydrogels in medicine
(Springer International Publishing, 2017)
Polymeric biomaterials represent large and very adaptable class of biomaterials, which makes them very suitable for diversity of biomedical applications. Polymers can be synthesized to have a variety of structures and ...
Nanomaterials for skin care
(Springer International Publishing, 2017)
There are a lot of cosmetic products on the market based on nanotechnology. Those products contain nanomaterials since they have many advantages such as improved delivery of active ingredients, stability and photostability ...
Characterization of Tube Repair Weld in Thermal Power Plant Made of a 12% Cr Tempered Martensite Ferritic Steel
(Springer-Verlag Berlin, Berlin, 2017)
The heat resistant tempered martensite ferritic steel X20CrMoV121 (DIN) has been extensively used within the last few decades as a material for boiler tubing systems and pipelines in thermal power plants (TPP). Long-term ...
Charpy and SEM investigation of Al-Mg friction stir weldments
(International Conference on Fracture, 2017)
Influence of friction stir welding processing variables on Charpy impact fracture behaviour of Al-Mg 5083 alloy was studied. Rotational and traversal welding rates were linked to the dynamic crack initiation and ductile ...