Претраживање
Приказ резултата 11-20 од 34
Stereometric displacement and strain analysis in the development of innovative experimental setups
(VDI Verein Deutscher Ingenieure, 2014)
Failure prediction of gas and oil drilling rig pipelines with axial defects
(Elsevier Science Bv, Amsterdam, 2014)
Working conditions of casing pipes in drilling rigs can significantly influence the initiation and development of damage in the material, and therefore also the safe service of the entire system. In this work, an integrity ...
Numerical modeling of austenite-ferrite weldment tensile test
(Elsevier Science Bv, Amsterdam, 2014)
The aim of this paper was to numerically simulate the plastic behavior of a three-material body specimen and compare the results with physical experiments performed on the same specimen. Both the physical and numerical ...
Analysis of Composite Shrinkage Stresses on 3D Premolar Models with Different Cavity Design using Finite Element Method
(Trans Tech Publications Ltd, Durnten-Zurich, 2014)
Local polymerization stress occurs due to polymerization shrinkage of resin based composites adhesively bonded to tooth tissues. Shrinkage causes local displacements of cavity walls, with possible occurrence of micro-cracks ...
Multi-objective container transport optimization on intermodal networks based on mathematical model
(Scientific Research Center Ltd Belgrade, Belgrade, 2014)
International container shipping is one of the most dynamic economic sectors of the last few years. In terms of value, global seaborne container trade is believed to account for approximately 60 percent of all world seaborne ...
Imact of parameters of plasma transferred arc welding process on the weld layer geometry
(Faculty of Mechanical Engineering in Zenica, University of ZenicaBahcesehir University Istanbul, Muhendislik Fakultesi, TurkeyEscola Tecnica Superior D, Hungary, 2014)
In many cases parts of machines and structures are exposed to wear or action of aggressive corrosive environments. In such cases, the structure integrity can be compromised in a relatively short period of time. Therefore, ...
Improvement of environment quality by the arsenic phytoremediation from ashes
(Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014)
The objective of this paper is to investigate possibility of environment quality improvement of
landfill ashes by a new technology of phytoremediation. The research included an analysis of
the adsorption of arsenic, ...
Management of water quality in reservoirs in correlation with environment
(Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014)
The main objective for the conducted research presented in this paper was to quantify, analyze
reversibility of the algal bloom process and present changes in water quality parameters in the
function of time, depth and ...
Management of forest unit “Debeljak Medenovac” as a model example in ecological and energy value estimation of wood biomass
(Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2014)
The research aimed at presenting an example on how biomass production could be managed,
ecologically and energy value of biomass calculated, how it can be used and under which
conditions as well as how is the quantity ...
Sustainable techno-economic utilization of hydro potential between Serbia and Romania
(PROCEEDINGS OF THE INTERNATIONAL CONFERENCE “SUSTAINABLE ENERGY USE AND MANAGEMENT” 20th May 2014 TARGU-JIU, ROMANIA, 2014)
The subject of the research is the water potential of the Danube River in Serbia, predominantly in
the inter-border section shared with Romania, and implemented and planned models of hydro potential
utilization, in ...