Претраживање
Приказ резултата 61-70 од 75
Fatigue life analysis of the integral skin-stringer panel using xfem
(Institut za ispitivanje materijala, Beograd, 2017)
Fatigue life of integral skin-stringer panels produced by laser beam welding (LBW) is analysed. This type of panel is used in airframe construction where fatigue and damage tolerance are of paramount importance, since ...
Impact of temperature and exploitation time on plane strain fracture toughness, k-ic, in a welded joint
(Institut za ispitivanje materijala, Beograd, 2017)
This paper presents the analysis of the impact of temperature and exploitation time on the tendency toward brittle fracture of welded joint constituents of new and exploited low-alloyed Cr-Mo steel A-387 Gr. B, by using ...
Simulation of fatigue crack growth in a2024-t351 t-welded joint
(Institut za ispitivanje materijala, Beograd, 2017)
Fatigue crack growth in friction stir welded T joints under three point bending is simulated numerically using the Extended Finite Element Method (XFEM). Three point bending fatigue load stress is applied at the centre of ...
Expectations, reality and perspectives in using bim for the green building design
(Institut za ispitivanje materijala, Beograd, 2017)
In the late 1970s when the first programs for building energy consumption simulation appeared, architectural practice was based on paper documentation and 2D drafting programs were considered as state of the art technologies. ...
Cracking due to repair welding of the treiber roll
(Institut za ispitivanje materijala, Beograd, 2017)
Repair welding has caused crack initiation in the upper Treiber roll in the steel works plant mill at Zelezara in Smederevo. The upper and lower Treiber rolls serve the purpose of folding and directing rolled metal strips, ...
Remaining life determination for pressure vessel in a refinery
(Institut za ispitivanje materijala, Beograd, 2016)
Repair and inspection has been performed on a pressure vessel in the oil refinery for downstream treatment of crude oil in Iraq, without technical documentation. Two different approaches have given totally different results ...
Impact of austenitic steels' mechanical properties on allowed stress and wall thickness of pressure equipment
(Institut za ispitivanje materijala, Beograd, 2018)
The Pressure Equipment Directive (PED) and Regulations on Technical Requirements for Designing, Manufacturing and Conformity Assessment of Pressure Equipment bring a number of changes to the design of pressure equipment ...
Design and manufacture of reformer in polymer electrolyte membrane fuel cell
(Institut za ispitivanje materijala, Beograd, 2017)
The paper describes the development and manufacturing aspects of the reformer in polymer electrolyte membrane (PEM) fuel cell, from the first step of realization that includes modelling the main parts of the reformer; ...
Integrity assessment of vital beam components that enable conjoint operation of two bridge cranes
(Institut za ispitivanje materijala, Beograd, 2018)
Vital components of the beam that enable conjoint operation of two bridge cranes are braces and threaded spindle. The beam connects two bridge cranes with overall lifting capacity of 500 t (2 x 250 t) and enables their ...
Fatigue life estimation of cct specimen using xfem
(Institut za ispitivanje materijala, Beograd, 2017)
In this study a central crack tension (CCT) specimen is chosen for analysis to demonstrate the capability and reliability of the extended finite element method (XFEM) in predicting the crack propagation trajectory and ...