Претраживање
Приказ резултата 21-30 од 75
Tensile behaviour of polyethylene under different loading rates in the presence of imperfections
(Institut za ispitivanje materijala, Beograd, 2016)
This paper highlights the changes of polyethylene behaviour during various loading rates. The experimental programme was carried out on samples taken from PE80 polyethylene gas pipes with simulated imperfections with ...
Numerical assessment of stress intensity factors at tips of multi-site cracks in unstiffened panel
(Institut za ispitivanje materijala, Beograd, 2017)
The aim of this paper is to establish and demonstrate diverse capacity and performances of different numerical methods for calculating stress intensity factors' (SIFs) histories versus crack length for problems involving ...
Fatigue life estimation of cct specimen using xfem
(Institut za ispitivanje materijala, Beograd, 2017)
In this study a central crack tension (CCT) specimen is chosen for analysis to demonstrate the capability and reliability of the extended finite element method (XFEM) in predicting the crack propagation trajectory and ...
Impact of temperature and exploitation time on plane strain fracture toughness, k-ic, in a welded joint
(Institut za ispitivanje materijala, Beograd, 2017)
This paper presents the analysis of the impact of temperature and exploitation time on the tendency toward brittle fracture of welded joint constituents of new and exploited low-alloyed Cr-Mo steel A-387 Gr. B, by using ...
Numerical analysis of stress distribution in total hip replacement implant
(Institut za ispitivanje materijala, Beograd, 2017)
Total hip replacement implants represent permanent implants and require large bone and cartilage removal during implantation. Revision would affect joint capability to sustain load, which makes this procedure irreversible. ...
Determination of damage and repair methodology for the runner manhole of Kaplan turbine at the hydro power plant 'Djerdap 1'
(Institut za ispitivanje materijala, Beograd, 2016)
Results of non-destructive testing of the Kaplan turbine runner manhole welded structure are presented, on the basis of which the repair methodology is defined. During repair, the welding technology for elements of the ...
Influence of encastering on thin-walled cantilever beams with u and z profiles on the magnitude of equivalent stress and deformation
(Institut za ispitivanje materijala, Beograd, 2019)
The purpose of this work is to present analytical and numerical determination of equivalent stress and deformation of open section thin-walled U and Z cantilever beams loaded with torsion. This work can be divided into two ...
Effect of plasma hardfacing and carbides presence on the occurrence of cracks and microcracks
(Institut za ispitivanje materijala, Beograd, 2018)
Presented is the effect of plasma hardfacing (or just hardfacing) and carbides presence on the occurrence of cracks and microcracks in the welded layer. The reasons behind this phenomenon are analysed and explained. In ...
Cavitation resistance of composite polyester resin/basalt powder
(Institut za ispitivanje materijala, Beograd, 2019)
The paper presents the results of research on cavitation resistance of the composite based on unsaturated polyester resin and basalt powder, as reinforcement. Basalt powder was obtained by grinding and micronising basaltic ...
Strain field measurements of glass ionomer cement
(Institut za ispitivanje materijala, Beograd, 2019)
Extensive evolution of glass ionomer cements (GIC) has marked a significant shift in the practice of luting indirect dental restorations limiting the use of zinc-phosphate and zinc-polycarboxylate cements to a few indications. ...