Determination of Arrhenius parameters for advanced kinetic model used in CFD modeling of the wood pellet combustion process
Само за регистроване кориснике
2022
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
With the increased popularity of using wood stoves for household heating in recent years, numerous experimental research projects have been launched with the goal of generating cleaner and more efficient stove designs. This work is focused on mathematical modeling of combustion process in low-power residential heating appliance (small-scale stove) fuelled by different wood pellets (WP1-Beech (hardwood) and WP2-Pine (softwood)). Kinetic model scheme that encompasses determination of Arrhenius parameters was proposed for applied Finite rate/Eddy Dissipation approach. Types of wood pellets have been combusted on the experimental stand which is equipped with a set of temperature sensors and exhaust analyzer. A comparison of results obtained from combustion in the heating unit has been performed to find relations between established kinetics of devolatilization for various wood pellets and to determine exhaust composition, arising from oxidation reactions. Numerical modeling using computati...onal fluid dynamics (CFD) has been performed for the char and CO oxidations to supplement the experimental results. Due to limitations on installed stove such as poor design, air supply, fume extraction, or heat exchanger can lead to excessive CO emissions or lower energy efficiency. Outcomes show that it is crucial to minimize unused stove volume and to enhance gaseous mixing for reduction of CO emissions, while maintaining sufficiently high temperatures for supporting fast oxidation reactions. Results of comparisons of conducted analyses can be useful in areas related to process optimization and improvement of combustion and devolatilization reaction conditions in the small scale heating units.
Кључне речи:
Wood pellet stove / Pre-exponential factor / Computational fluid dynamics / Combustion / Carbon monoxide emission / Arrhenius parametersИзвор:
Fuel, 2022, 323Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200017 (Универзитет у Београду, Институт за нуклеарне науке Винча, Београд-Винча) (RS-MESTD-inst-2020-200017)
DOI: 10.1016/j.fuel.2022.124323
ISSN: 0016-2361
WoS: 000803734900002
Scopus: 2-s2.0-85130172859
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Manić, Nebojša AU - Janković, Bojan PY - 2022 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3715 AB - With the increased popularity of using wood stoves for household heating in recent years, numerous experimental research projects have been launched with the goal of generating cleaner and more efficient stove designs. This work is focused on mathematical modeling of combustion process in low-power residential heating appliance (small-scale stove) fuelled by different wood pellets (WP1-Beech (hardwood) and WP2-Pine (softwood)). Kinetic model scheme that encompasses determination of Arrhenius parameters was proposed for applied Finite rate/Eddy Dissipation approach. Types of wood pellets have been combusted on the experimental stand which is equipped with a set of temperature sensors and exhaust analyzer. A comparison of results obtained from combustion in the heating unit has been performed to find relations between established kinetics of devolatilization for various wood pellets and to determine exhaust composition, arising from oxidation reactions. Numerical modeling using computational fluid dynamics (CFD) has been performed for the char and CO oxidations to supplement the experimental results. Due to limitations on installed stove such as poor design, air supply, fume extraction, or heat exchanger can lead to excessive CO emissions or lower energy efficiency. Outcomes show that it is crucial to minimize unused stove volume and to enhance gaseous mixing for reduction of CO emissions, while maintaining sufficiently high temperatures for supporting fast oxidation reactions. Results of comparisons of conducted analyses can be useful in areas related to process optimization and improvement of combustion and devolatilization reaction conditions in the small scale heating units. PB - Elsevier Sci Ltd, Oxford T2 - Fuel T1 - Determination of Arrhenius parameters for advanced kinetic model used in CFD modeling of the wood pellet combustion process VL - 323 DO - 10.1016/j.fuel.2022.124323 ER -
@article{ author = "Manić, Nebojša and Janković, Bojan", year = "2022", abstract = "With the increased popularity of using wood stoves for household heating in recent years, numerous experimental research projects have been launched with the goal of generating cleaner and more efficient stove designs. This work is focused on mathematical modeling of combustion process in low-power residential heating appliance (small-scale stove) fuelled by different wood pellets (WP1-Beech (hardwood) and WP2-Pine (softwood)). Kinetic model scheme that encompasses determination of Arrhenius parameters was proposed for applied Finite rate/Eddy Dissipation approach. Types of wood pellets have been combusted on the experimental stand which is equipped with a set of temperature sensors and exhaust analyzer. A comparison of results obtained from combustion in the heating unit has been performed to find relations between established kinetics of devolatilization for various wood pellets and to determine exhaust composition, arising from oxidation reactions. Numerical modeling using computational fluid dynamics (CFD) has been performed for the char and CO oxidations to supplement the experimental results. Due to limitations on installed stove such as poor design, air supply, fume extraction, or heat exchanger can lead to excessive CO emissions or lower energy efficiency. Outcomes show that it is crucial to minimize unused stove volume and to enhance gaseous mixing for reduction of CO emissions, while maintaining sufficiently high temperatures for supporting fast oxidation reactions. Results of comparisons of conducted analyses can be useful in areas related to process optimization and improvement of combustion and devolatilization reaction conditions in the small scale heating units.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Fuel", title = "Determination of Arrhenius parameters for advanced kinetic model used in CFD modeling of the wood pellet combustion process", volume = "323", doi = "10.1016/j.fuel.2022.124323" }
Manić, N.,& Janković, B.. (2022). Determination of Arrhenius parameters for advanced kinetic model used in CFD modeling of the wood pellet combustion process. in Fuel Elsevier Sci Ltd, Oxford., 323. https://doi.org/10.1016/j.fuel.2022.124323
Manić N, Janković B. Determination of Arrhenius parameters for advanced kinetic model used in CFD modeling of the wood pellet combustion process. in Fuel. 2022;323. doi:10.1016/j.fuel.2022.124323 .
Manić, Nebojša, Janković, Bojan, "Determination of Arrhenius parameters for advanced kinetic model used in CFD modeling of the wood pellet combustion process" in Fuel, 323 (2022), https://doi.org/10.1016/j.fuel.2022.124323 . .