An approach to development of the digital inspection twin based on CMM
2021
Конференцијски прилог (Објављена верзија)
BY, CC BY-NC-ND
Метаподаци
Приказ свих података о документуАпстракт
Digital inspection twin (DIT) acting as a mirror between the physical and virtual measuring world. In this paper the measurement system with the CMMs ZEISS UMM 500 and DEA-IOTA-2203 was used as a physical twin, and a virtual machine, generated after modelling and configuring in PTC Creo software. Virtual measurement system is developed for inspection of the standard types of tolerances (concentricity, perpendicularity i.e.) and basic inspection features (IF) (plane, cylinder, truncated cone i.e.). The result of this paper is a new approach of the conceptual development of the digital inspection twin, based on CMMs - towards off-line DIT based on CMM by virtue of the control data list (CDL) and.ncl (DMIS) file.
Кључне речи:
Simulation / Inspection planning / Digital twin / CMMИзвор:
Measurement: Sensors, 2021, 18Издавач:
- Elsevier Ltd
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200105 (Универзитет у Београду, Машински факултет) (RS-MESTD-inst-2020-200105)
Колекције
Институција/група
Mašinski fakultetTY - CONF AU - Stojadinović, Slavenko AU - Majstorović, Vidosav D. AU - Durakbasa, Numan M. PY - 2021 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3668 AB - Digital inspection twin (DIT) acting as a mirror between the physical and virtual measuring world. In this paper the measurement system with the CMMs ZEISS UMM 500 and DEA-IOTA-2203 was used as a physical twin, and a virtual machine, generated after modelling and configuring in PTC Creo software. Virtual measurement system is developed for inspection of the standard types of tolerances (concentricity, perpendicularity i.e.) and basic inspection features (IF) (plane, cylinder, truncated cone i.e.). The result of this paper is a new approach of the conceptual development of the digital inspection twin, based on CMMs - towards off-line DIT based on CMM by virtue of the control data list (CDL) and.ncl (DMIS) file. PB - Elsevier Ltd C3 - Measurement: Sensors T1 - An approach to development of the digital inspection twin based on CMM VL - 18 DO - 10.1016/j.measen.2021.100300 ER -
@conference{ author = "Stojadinović, Slavenko and Majstorović, Vidosav D. and Durakbasa, Numan M.", year = "2021", abstract = "Digital inspection twin (DIT) acting as a mirror between the physical and virtual measuring world. In this paper the measurement system with the CMMs ZEISS UMM 500 and DEA-IOTA-2203 was used as a physical twin, and a virtual machine, generated after modelling and configuring in PTC Creo software. Virtual measurement system is developed for inspection of the standard types of tolerances (concentricity, perpendicularity i.e.) and basic inspection features (IF) (plane, cylinder, truncated cone i.e.). The result of this paper is a new approach of the conceptual development of the digital inspection twin, based on CMMs - towards off-line DIT based on CMM by virtue of the control data list (CDL) and.ncl (DMIS) file.", publisher = "Elsevier Ltd", journal = "Measurement: Sensors", title = "An approach to development of the digital inspection twin based on CMM", volume = "18", doi = "10.1016/j.measen.2021.100300" }
Stojadinović, S., Majstorović, V. D.,& Durakbasa, N. M.. (2021). An approach to development of the digital inspection twin based on CMM. in Measurement: Sensors Elsevier Ltd., 18. https://doi.org/10.1016/j.measen.2021.100300
Stojadinović S, Majstorović VD, Durakbasa NM. An approach to development of the digital inspection twin based on CMM. in Measurement: Sensors. 2021;18. doi:10.1016/j.measen.2021.100300 .
Stojadinović, Slavenko, Majstorović, Vidosav D., Durakbasa, Numan M., "An approach to development of the digital inspection twin based on CMM" in Measurement: Sensors, 18 (2021), https://doi.org/10.1016/j.measen.2021.100300 . .