Effect of silicon carbide nanoparticles size on friction properties of electroless nickel coatings
Нема приказа
Аутори
Kandeva, MaraSvoboda, Petr
Nikolov, N.
Todorov, T.
Sofronov, Y.
Pokusova, Marcela
Vencl, Aleksandar
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The nickel coatings were produced by electroless plating process, without and with addition of 5-7 vol.% SiC nanoparticles of five different sizes (10, 45, 100, 150 and 700 nm in diameter). Coatings were tested in as-deposited and in heat treated (heating at 300 degrees C for 6 h) condition, with two different surface textures preparation. This type of coatings was previously tested and showed improved abrasive wear resistance. Coefficients of friction testing of electroless nickel coatings in contact with bronze counter-body were determined in ambient air and unlubricated conditions. Static and kinetic coefficient of friction, as well as the difference between them, were analysed and discussed. The influence of size of embedded SiC particles in composite coatings, on tested friction properties of these coatings was also determined.
Кључне речи:
silicon carbide / nanoparticles / friction / electroless nickel coatings / compositesИзвор:
Journal of Environmental Protection and Ecology, 2020, 21, 4, 1314-1325Издавач:
- Scibulcom Ltd.
Финансирање / пројекти:
- European Regional Development Fund within the Operational Programme 'Science and Education for Smart Growth 2014-2020' under the Project CoE 'National centre of mechatronics and clean technologies' [BG05M2OP001-1.001-0008]
- Republic of Serbia, Ministry of Education, Science and Technological Development [CA15102]
- Истраживање и оптимизација технолошких и функционалних перформанси вентилационог млина термоелектране Костолац Б (RS-MESTD-Technological Development (TD or TR)-34028)
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Kandeva, Mara AU - Svoboda, Petr AU - Nikolov, N. AU - Todorov, T. AU - Sofronov, Y. AU - Pokusova, Marcela AU - Vencl, Aleksandar PY - 2020 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3438 AB - The nickel coatings were produced by electroless plating process, without and with addition of 5-7 vol.% SiC nanoparticles of five different sizes (10, 45, 100, 150 and 700 nm in diameter). Coatings were tested in as-deposited and in heat treated (heating at 300 degrees C for 6 h) condition, with two different surface textures preparation. This type of coatings was previously tested and showed improved abrasive wear resistance. Coefficients of friction testing of electroless nickel coatings in contact with bronze counter-body were determined in ambient air and unlubricated conditions. Static and kinetic coefficient of friction, as well as the difference between them, were analysed and discussed. The influence of size of embedded SiC particles in composite coatings, on tested friction properties of these coatings was also determined. PB - Scibulcom Ltd. T2 - Journal of Environmental Protection and Ecology T1 - Effect of silicon carbide nanoparticles size on friction properties of electroless nickel coatings EP - 1325 IS - 4 SP - 1314 VL - 21 UR - https://hdl.handle.net/21.15107/rcub_machinery_3438 ER -
@article{ author = "Kandeva, Mara and Svoboda, Petr and Nikolov, N. and Todorov, T. and Sofronov, Y. and Pokusova, Marcela and Vencl, Aleksandar", year = "2020", abstract = "The nickel coatings were produced by electroless plating process, without and with addition of 5-7 vol.% SiC nanoparticles of five different sizes (10, 45, 100, 150 and 700 nm in diameter). Coatings were tested in as-deposited and in heat treated (heating at 300 degrees C for 6 h) condition, with two different surface textures preparation. This type of coatings was previously tested and showed improved abrasive wear resistance. Coefficients of friction testing of electroless nickel coatings in contact with bronze counter-body were determined in ambient air and unlubricated conditions. Static and kinetic coefficient of friction, as well as the difference between them, were analysed and discussed. The influence of size of embedded SiC particles in composite coatings, on tested friction properties of these coatings was also determined.", publisher = "Scibulcom Ltd.", journal = "Journal of Environmental Protection and Ecology", title = "Effect of silicon carbide nanoparticles size on friction properties of electroless nickel coatings", pages = "1325-1314", number = "4", volume = "21", url = "https://hdl.handle.net/21.15107/rcub_machinery_3438" }
Kandeva, M., Svoboda, P., Nikolov, N., Todorov, T., Sofronov, Y., Pokusova, M.,& Vencl, A.. (2020). Effect of silicon carbide nanoparticles size on friction properties of electroless nickel coatings. in Journal of Environmental Protection and Ecology Scibulcom Ltd.., 21(4), 1314-1325. https://hdl.handle.net/21.15107/rcub_machinery_3438
Kandeva M, Svoboda P, Nikolov N, Todorov T, Sofronov Y, Pokusova M, Vencl A. Effect of silicon carbide nanoparticles size on friction properties of electroless nickel coatings. in Journal of Environmental Protection and Ecology. 2020;21(4):1314-1325. https://hdl.handle.net/21.15107/rcub_machinery_3438 .
Kandeva, Mara, Svoboda, Petr, Nikolov, N., Todorov, T., Sofronov, Y., Pokusova, Marcela, Vencl, Aleksandar, "Effect of silicon carbide nanoparticles size on friction properties of electroless nickel coatings" in Journal of Environmental Protection and Ecology, 21, no. 4 (2020):1314-1325, https://hdl.handle.net/21.15107/rcub_machinery_3438 .