Tribological behaviour of a356/sic nanocomposite
2019
Аутори
Veličković, SandraStojanović, Blaža
Vencl, Aleksandar
Babić, M.
Džunić, D.
Pantić, M.
Sljivić, Veljko
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The paper presents tribological behaviour of aluminium nanocomposite A356/SiC produced by the compocasting process with mechanical alloying preprocessing (ball milling). Tribological tests were performed on tribometer with block-on-disc contact geometry under lubricated sliding conditions. Influence of amount of silicon carbide reinforcement (0, 0.2, 0.3 and 0.5 wt.%) on wear rate was investigated in the following testing conditions: sliding speed of 0.25 and 1.0 m/s, normal load of 40 N and 100 N and at sliding distance of 1000 m. Analysis of worn surface of nanocomposites was performed by using SEM equipped with EDS.
Кључне речи:
wear rate / silicon carbide / nanocomposite / aluminiumИзвор:
Proceedings on Engineering Sciences, 2019, 1, 1, 115-123Издавач:
- Faculty of Engineering, University of Kragujevac
Финансирање / пројекти:
- Развој триболошких микро/нано двокомпонентних и хибридних самоподмазујућих композита (RS-MESTD-Technological Development (TD or TR)-35021)
- Истраживање и оптимизација технолошких и функционалних перформанси вентилационог млина термоелектране Костолац Б (RS-MESTD-Technological Development (TD or TR)-34028)
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Veličković, Sandra AU - Stojanović, Blaža AU - Vencl, Aleksandar AU - Babić, M. AU - Džunić, D. AU - Pantić, M. AU - Sljivić, Veljko PY - 2019 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3203 AB - The paper presents tribological behaviour of aluminium nanocomposite A356/SiC produced by the compocasting process with mechanical alloying preprocessing (ball milling). Tribological tests were performed on tribometer with block-on-disc contact geometry under lubricated sliding conditions. Influence of amount of silicon carbide reinforcement (0, 0.2, 0.3 and 0.5 wt.%) on wear rate was investigated in the following testing conditions: sliding speed of 0.25 and 1.0 m/s, normal load of 40 N and 100 N and at sliding distance of 1000 m. Analysis of worn surface of nanocomposites was performed by using SEM equipped with EDS. PB - Faculty of Engineering, University of Kragujevac T2 - Proceedings on Engineering Sciences T1 - Tribological behaviour of a356/sic nanocomposite EP - 123 IS - 1 SP - 115 VL - 1 DO - 10.24874/PES01.01.016 ER -
@article{ author = "Veličković, Sandra and Stojanović, Blaža and Vencl, Aleksandar and Babić, M. and Džunić, D. and Pantić, M. and Sljivić, Veljko", year = "2019", abstract = "The paper presents tribological behaviour of aluminium nanocomposite A356/SiC produced by the compocasting process with mechanical alloying preprocessing (ball milling). Tribological tests were performed on tribometer with block-on-disc contact geometry under lubricated sliding conditions. Influence of amount of silicon carbide reinforcement (0, 0.2, 0.3 and 0.5 wt.%) on wear rate was investigated in the following testing conditions: sliding speed of 0.25 and 1.0 m/s, normal load of 40 N and 100 N and at sliding distance of 1000 m. Analysis of worn surface of nanocomposites was performed by using SEM equipped with EDS.", publisher = "Faculty of Engineering, University of Kragujevac", journal = "Proceedings on Engineering Sciences", title = "Tribological behaviour of a356/sic nanocomposite", pages = "123-115", number = "1", volume = "1", doi = "10.24874/PES01.01.016" }
Veličković, S., Stojanović, B., Vencl, A., Babić, M., Džunić, D., Pantić, M.,& Sljivić, V.. (2019). Tribological behaviour of a356/sic nanocomposite. in Proceedings on Engineering Sciences Faculty of Engineering, University of Kragujevac., 1(1), 115-123. https://doi.org/10.24874/PES01.01.016
Veličković S, Stojanović B, Vencl A, Babić M, Džunić D, Pantić M, Sljivić V. Tribological behaviour of a356/sic nanocomposite. in Proceedings on Engineering Sciences. 2019;1(1):115-123. doi:10.24874/PES01.01.016 .
Veličković, Sandra, Stojanović, Blaža, Vencl, Aleksandar, Babić, M., Džunić, D., Pantić, M., Sljivić, Veljko, "Tribological behaviour of a356/sic nanocomposite" in Proceedings on Engineering Sciences, 1, no. 1 (2019):115-123, https://doi.org/10.24874/PES01.01.016 . .