3D analiza različne geometrije metamaterijala i simulacije upotrebe metamaterijala takvih geometrija
3D analysis of different metamaterial geometry and simulation of metamaterial usage
2019
Аутори
Kosić, BorisStojićević, Miša
Jeli, Zorana
Pokonstantinović, Branislav
Duta, Alina
Dragičević, Aleksandra
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Ovaj rad istražuje uticaj različitih geometrijskih struktura na nove koncepte formiranja tehničkih sistema. Sposobnost da neke geometrijske strukture budu u stanju da izdrže određeni nivo deformacije, koristilo se za zamenu zglobova u određenim sklopovima tehničkih sistema. Sada sva ta kretanja mogu da se postignu deformacijom geometrijskih struktura. Dobijeni rezultati iz simulacija, definišu nivo deformacije koje strukture mogu izdržati. Projektovanje 3D modela i simulacija sprovedeno je u SoildWorks 2016. U okviru ovog rada ispitano je nekoliko različitih struktura metamaterijala. Izvršene su 64 simulacije promenom unutrašnje strukture, debljine i orijentacije metamaterijala. Za svaki simulaciju kao rezyltat su dobijani naponi i pomeranja. Pored toga, izvršena je simulacija tri modela klješta, u kojima su upotrebljeni meta-materijali ispitivane geometrije, a rezultati su upoređeni sa rezultatima prethodnih simulacija.
This paper investigates the influence of different geometrical structures on new concepts for the formation of technical systems. The ability of some geometric structures to withstand a certain level of deformation, was used to replace joints in certain assemblies of technical systems. Now, all movements are accomplished with deformation of geometrical structures. Obtained results from simulations define the level of deformation which structures can withstand. Designing of 3D models and simulations were conducted in SOLIDWORKS 2016. Several different structures of metamaterials will be examined. Sixty-four simulations were conducted by changing the internal structure, thickness and orientation of metamaterials. For each simulation, the results were presented as stresses and displacements. Additionally, three model of pliers have been simulated, and its results were compared with the results from previous simulations.
Кључне речи:
Solidworks / simulation / metamaterial / geometric structure / 3D printing / 3D modelИзвор:
FME Transactions, 2019, 47, 2, 349-354Издавач:
- Univerzitet u Beogradu - Mašinski fakultet, Beograd
DOI: 10.5937/fmet1902349K
ISSN: 1451-2092
WoS: 000457613800021
Scopus: 2-s2.0-85063238932
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Kosić, Boris AU - Stojićević, Miša AU - Jeli, Zorana AU - Pokonstantinović, Branislav AU - Duta, Alina AU - Dragičević, Aleksandra PY - 2019 UR - https://machinery.mas.bg.ac.rs/handle/123456789/3122 AB - Ovaj rad istražuje uticaj različitih geometrijskih struktura na nove koncepte formiranja tehničkih sistema. Sposobnost da neke geometrijske strukture budu u stanju da izdrže određeni nivo deformacije, koristilo se za zamenu zglobova u određenim sklopovima tehničkih sistema. Sada sva ta kretanja mogu da se postignu deformacijom geometrijskih struktura. Dobijeni rezultati iz simulacija, definišu nivo deformacije koje strukture mogu izdržati. Projektovanje 3D modela i simulacija sprovedeno je u SoildWorks 2016. U okviru ovog rada ispitano je nekoliko različitih struktura metamaterijala. Izvršene su 64 simulacije promenom unutrašnje strukture, debljine i orijentacije metamaterijala. Za svaki simulaciju kao rezyltat su dobijani naponi i pomeranja. Pored toga, izvršena je simulacija tri modela klješta, u kojima su upotrebljeni meta-materijali ispitivane geometrije, a rezultati su upoređeni sa rezultatima prethodnih simulacija. AB - This paper investigates the influence of different geometrical structures on new concepts for the formation of technical systems. The ability of some geometric structures to withstand a certain level of deformation, was used to replace joints in certain assemblies of technical systems. Now, all movements are accomplished with deformation of geometrical structures. Obtained results from simulations define the level of deformation which structures can withstand. Designing of 3D models and simulations were conducted in SOLIDWORKS 2016. Several different structures of metamaterials will be examined. Sixty-four simulations were conducted by changing the internal structure, thickness and orientation of metamaterials. For each simulation, the results were presented as stresses and displacements. Additionally, three model of pliers have been simulated, and its results were compared with the results from previous simulations. PB - Univerzitet u Beogradu - Mašinski fakultet, Beograd T2 - FME Transactions T1 - 3D analiza različne geometrije metamaterijala i simulacije upotrebe metamaterijala takvih geometrija T1 - 3D analysis of different metamaterial geometry and simulation of metamaterial usage EP - 354 IS - 2 SP - 349 VL - 47 DO - 10.5937/fmet1902349K ER -
@article{ author = "Kosić, Boris and Stojićević, Miša and Jeli, Zorana and Pokonstantinović, Branislav and Duta, Alina and Dragičević, Aleksandra", year = "2019", abstract = "Ovaj rad istražuje uticaj različitih geometrijskih struktura na nove koncepte formiranja tehničkih sistema. Sposobnost da neke geometrijske strukture budu u stanju da izdrže određeni nivo deformacije, koristilo se za zamenu zglobova u određenim sklopovima tehničkih sistema. Sada sva ta kretanja mogu da se postignu deformacijom geometrijskih struktura. Dobijeni rezultati iz simulacija, definišu nivo deformacije koje strukture mogu izdržati. Projektovanje 3D modela i simulacija sprovedeno je u SoildWorks 2016. U okviru ovog rada ispitano je nekoliko različitih struktura metamaterijala. Izvršene su 64 simulacije promenom unutrašnje strukture, debljine i orijentacije metamaterijala. Za svaki simulaciju kao rezyltat su dobijani naponi i pomeranja. Pored toga, izvršena je simulacija tri modela klješta, u kojima su upotrebljeni meta-materijali ispitivane geometrije, a rezultati su upoređeni sa rezultatima prethodnih simulacija., This paper investigates the influence of different geometrical structures on new concepts for the formation of technical systems. The ability of some geometric structures to withstand a certain level of deformation, was used to replace joints in certain assemblies of technical systems. Now, all movements are accomplished with deformation of geometrical structures. Obtained results from simulations define the level of deformation which structures can withstand. Designing of 3D models and simulations were conducted in SOLIDWORKS 2016. Several different structures of metamaterials will be examined. Sixty-four simulations were conducted by changing the internal structure, thickness and orientation of metamaterials. For each simulation, the results were presented as stresses and displacements. Additionally, three model of pliers have been simulated, and its results were compared with the results from previous simulations.", publisher = "Univerzitet u Beogradu - Mašinski fakultet, Beograd", journal = "FME Transactions", title = "3D analiza različne geometrije metamaterijala i simulacije upotrebe metamaterijala takvih geometrija, 3D analysis of different metamaterial geometry and simulation of metamaterial usage", pages = "354-349", number = "2", volume = "47", doi = "10.5937/fmet1902349K" }
Kosić, B., Stojićević, M., Jeli, Z., Pokonstantinović, B., Duta, A.,& Dragičević, A.. (2019). 3D analiza različne geometrije metamaterijala i simulacije upotrebe metamaterijala takvih geometrija. in FME Transactions Univerzitet u Beogradu - Mašinski fakultet, Beograd., 47(2), 349-354. https://doi.org/10.5937/fmet1902349K
Kosić B, Stojićević M, Jeli Z, Pokonstantinović B, Duta A, Dragičević A. 3D analiza različne geometrije metamaterijala i simulacije upotrebe metamaterijala takvih geometrija. in FME Transactions. 2019;47(2):349-354. doi:10.5937/fmet1902349K .
Kosić, Boris, Stojićević, Miša, Jeli, Zorana, Pokonstantinović, Branislav, Duta, Alina, Dragičević, Aleksandra, "3D analiza različne geometrije metamaterijala i simulacije upotrebe metamaterijala takvih geometrija" in FME Transactions, 47, no. 2 (2019):349-354, https://doi.org/10.5937/fmet1902349K . .