Virtual Instruments and Experiments in Engineering Education Lab Setup with Hydraulic Pump
Samo za registrovane korisnike
2018
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Fluid machinery courses demand, besides theoretical approach, also good practice and laboratory exercises. After course completion, students should be aware of all aspects of good practice and possible problems. Focus of this paper is on hydraulic pumps and designed demonstrational-educational test rig. It is possible to demonstrate and educate students in following: Bernoulli equation, Euler equation for turbomachinery, hydraulic losses, Venturi flow meter - geometry and measurements, cavitation and swirling flow phenomena, as well as in practical issues such as pump testing after international standard ISO 9906, pump control and energy efficiency issues, determination of hydraulic system characteristics, volumetric calibration of the Venturi flow meter, and etc. Students are educated how to choose and connect pressure transmitters, as well as how to calibrate them, how to apply and upgrade developed LabVIEW application. In addition, many components of the installation are transparent..., such as pipes at the pipe inlet and pressure side, Venturi flow meter, maul and calibration tank, as well as pump spiral casing. Flow visualization and application of modern measurement technique, such as particle image velocimetry are possible in this way. Following experiments of this test rig, students arc motivated to generate technical electronic report. In addition are presented virtual experiments, designed in LabVIEW for testing pumps in parallel and series modes.
Ključne reči:
hydraulic pump / LabVIEW / measurementsIzvor:
Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain, 2018, 2018-April, 1145-1152Izdavač:
- IEEE
Finansiranje / projekti:
- Swiss National Science Foundation [IZ74Z0_160454/1]
- Primena savremenih mernih i proračunskih tehnika za izučavanje strujnih parametara ventilacionih sistema na modelu energetski izuzetno efikasnog (pasivnog) objekta (RS-MESTD-Technological Development (TD or TR)-35046)
DOI: 10.1109/EDUCON.2018.8363358
ISSN: 2165-9559; 2165-9567
WoS: 000434866100158
Scopus: 2-s2.0-85048090577
Kolekcije
Institucija/grupa
Mašinski fakultetTY - CONF AU - Nedeljković, Miloš AU - Čantrak, Đorđe AU - Jaiiković, Novica Z. AU - Ilić, Dejan AU - Matijević, Milan S. PY - 2018 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2984 AB - Fluid machinery courses demand, besides theoretical approach, also good practice and laboratory exercises. After course completion, students should be aware of all aspects of good practice and possible problems. Focus of this paper is on hydraulic pumps and designed demonstrational-educational test rig. It is possible to demonstrate and educate students in following: Bernoulli equation, Euler equation for turbomachinery, hydraulic losses, Venturi flow meter - geometry and measurements, cavitation and swirling flow phenomena, as well as in practical issues such as pump testing after international standard ISO 9906, pump control and energy efficiency issues, determination of hydraulic system characteristics, volumetric calibration of the Venturi flow meter, and etc. Students are educated how to choose and connect pressure transmitters, as well as how to calibrate them, how to apply and upgrade developed LabVIEW application. In addition, many components of the installation are transparent, such as pipes at the pipe inlet and pressure side, Venturi flow meter, maul and calibration tank, as well as pump spiral casing. Flow visualization and application of modern measurement technique, such as particle image velocimetry are possible in this way. Following experiments of this test rig, students arc motivated to generate technical electronic report. In addition are presented virtual experiments, designed in LabVIEW for testing pumps in parallel and series modes. PB - IEEE C3 - Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain T1 - Virtual Instruments and Experiments in Engineering Education Lab Setup with Hydraulic Pump EP - 1152 SP - 1145 VL - 2018-April DO - 10.1109/EDUCON.2018.8363358 ER -
@conference{ author = "Nedeljković, Miloš and Čantrak, Đorđe and Jaiiković, Novica Z. and Ilić, Dejan and Matijević, Milan S.", year = "2018", abstract = "Fluid machinery courses demand, besides theoretical approach, also good practice and laboratory exercises. After course completion, students should be aware of all aspects of good practice and possible problems. Focus of this paper is on hydraulic pumps and designed demonstrational-educational test rig. It is possible to demonstrate and educate students in following: Bernoulli equation, Euler equation for turbomachinery, hydraulic losses, Venturi flow meter - geometry and measurements, cavitation and swirling flow phenomena, as well as in practical issues such as pump testing after international standard ISO 9906, pump control and energy efficiency issues, determination of hydraulic system characteristics, volumetric calibration of the Venturi flow meter, and etc. Students are educated how to choose and connect pressure transmitters, as well as how to calibrate them, how to apply and upgrade developed LabVIEW application. In addition, many components of the installation are transparent, such as pipes at the pipe inlet and pressure side, Venturi flow meter, maul and calibration tank, as well as pump spiral casing. Flow visualization and application of modern measurement technique, such as particle image velocimetry are possible in this way. Following experiments of this test rig, students arc motivated to generate technical electronic report. In addition are presented virtual experiments, designed in LabVIEW for testing pumps in parallel and series modes.", publisher = "IEEE", journal = "Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain", title = "Virtual Instruments and Experiments in Engineering Education Lab Setup with Hydraulic Pump", pages = "1152-1145", volume = "2018-April", doi = "10.1109/EDUCON.2018.8363358" }
Nedeljković, M., Čantrak, Đ., Jaiiković, N. Z., Ilić, D.,& Matijević, M. S.. (2018). Virtual Instruments and Experiments in Engineering Education Lab Setup with Hydraulic Pump. in Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain IEEE., 2018-April, 1145-1152. https://doi.org/10.1109/EDUCON.2018.8363358
Nedeljković M, Čantrak Đ, Jaiiković NZ, Ilić D, Matijević MS. Virtual Instruments and Experiments in Engineering Education Lab Setup with Hydraulic Pump. in Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain. 2018;2018-April:1145-1152. doi:10.1109/EDUCON.2018.8363358 .
Nedeljković, Miloš, Čantrak, Đorđe, Jaiiković, Novica Z., Ilić, Dejan, Matijević, Milan S., "Virtual Instruments and Experiments in Engineering Education Lab Setup with Hydraulic Pump" in Proceedings / 2018 IEEE Global Engineering Education Conference (EDUCON), April 17-20, Santa Cruz de Tenerife, Canary Islands, Spain, 2018-April (2018):1145-1152, https://doi.org/10.1109/EDUCON.2018.8363358 . .