Controlled modification of the surface morphology and roughness of stainless steel 316 by a high speed submerged cavitating water jet
Abstract
The aim of this paper is to demonstrate the possibly of using the cavitation phenomenon, primarily a cavitating water jet, for the controlled surface modification of metallic biomaterials. Stainless steel 316 (an austenitic face centered cubic metal) was subjected to high-speed submerged cavitating jets under certain working conditions, and different exposure times. The force generated by the collapse of cavitation bubbles is used to modify the surface topography on micro- and nano levels. Optical microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and interferometric profiling were used to characterize the surface morphology before and after cavitation treatment. The results confirm that at short exposure times, the observed characteristic features in the microstructure - holes and hills without material loss and wavy configuration - can be related to plastic deformation, while longer exposure times lead to erosion accompanied by material loss. The results r...elated to the different stages of cavitation damage demonstrate the possibility to use cavitation as a micro-nano fabrication method for the modification of biomaterial surfaces, e.g. for the controlled and convenient increase of surface roughness.
Keywords:
Surface roughness / Stainless steel / Plastic deformation / Micro jet / Cavitation / BiomaterialsSource:
Applied Surface Science, 2018, 458, 293-304Publisher:
- Elsevier Science Bv, Amsterdam
Funding / projects:
- Ministry of Science in Libya
- Higher Education Excellence Program of the Ministry of Human Capacities
DOI: 10.1016/j.apsusc.2018.07.007
ISSN: 0169-4332
WoS: 000441400000036
Scopus: 2-s2.0-85049948814
Collections
Institution/Community
Mašinski fakultetTY - JOUR AU - Hutli, Ezddin AU - Nedeljković, Miloš AU - Bonyar, Attila PY - 2018 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2891 AB - The aim of this paper is to demonstrate the possibly of using the cavitation phenomenon, primarily a cavitating water jet, for the controlled surface modification of metallic biomaterials. Stainless steel 316 (an austenitic face centered cubic metal) was subjected to high-speed submerged cavitating jets under certain working conditions, and different exposure times. The force generated by the collapse of cavitation bubbles is used to modify the surface topography on micro- and nano levels. Optical microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and interferometric profiling were used to characterize the surface morphology before and after cavitation treatment. The results confirm that at short exposure times, the observed characteristic features in the microstructure - holes and hills without material loss and wavy configuration - can be related to plastic deformation, while longer exposure times lead to erosion accompanied by material loss. The results related to the different stages of cavitation damage demonstrate the possibility to use cavitation as a micro-nano fabrication method for the modification of biomaterial surfaces, e.g. for the controlled and convenient increase of surface roughness. PB - Elsevier Science Bv, Amsterdam T2 - Applied Surface Science T1 - Controlled modification of the surface morphology and roughness of stainless steel 316 by a high speed submerged cavitating water jet EP - 304 SP - 293 VL - 458 DO - 10.1016/j.apsusc.2018.07.007 ER -
@article{ author = "Hutli, Ezddin and Nedeljković, Miloš and Bonyar, Attila", year = "2018", abstract = "The aim of this paper is to demonstrate the possibly of using the cavitation phenomenon, primarily a cavitating water jet, for the controlled surface modification of metallic biomaterials. Stainless steel 316 (an austenitic face centered cubic metal) was subjected to high-speed submerged cavitating jets under certain working conditions, and different exposure times. The force generated by the collapse of cavitation bubbles is used to modify the surface topography on micro- and nano levels. Optical microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and interferometric profiling were used to characterize the surface morphology before and after cavitation treatment. The results confirm that at short exposure times, the observed characteristic features in the microstructure - holes and hills without material loss and wavy configuration - can be related to plastic deformation, while longer exposure times lead to erosion accompanied by material loss. The results related to the different stages of cavitation damage demonstrate the possibility to use cavitation as a micro-nano fabrication method for the modification of biomaterial surfaces, e.g. for the controlled and convenient increase of surface roughness.", publisher = "Elsevier Science Bv, Amsterdam", journal = "Applied Surface Science", title = "Controlled modification of the surface morphology and roughness of stainless steel 316 by a high speed submerged cavitating water jet", pages = "304-293", volume = "458", doi = "10.1016/j.apsusc.2018.07.007" }
Hutli, E., Nedeljković, M.,& Bonyar, A.. (2018). Controlled modification of the surface morphology and roughness of stainless steel 316 by a high speed submerged cavitating water jet. in Applied Surface Science Elsevier Science Bv, Amsterdam., 458, 293-304. https://doi.org/10.1016/j.apsusc.2018.07.007
Hutli E, Nedeljković M, Bonyar A. Controlled modification of the surface morphology and roughness of stainless steel 316 by a high speed submerged cavitating water jet. in Applied Surface Science. 2018;458:293-304. doi:10.1016/j.apsusc.2018.07.007 .
Hutli, Ezddin, Nedeljković, Miloš, Bonyar, Attila, "Controlled modification of the surface morphology and roughness of stainless steel 316 by a high speed submerged cavitating water jet" in Applied Surface Science, 458 (2018):293-304, https://doi.org/10.1016/j.apsusc.2018.07.007 . .