Comparison of 3D Printed Gear's Geometrical Characteristics
2018
Аутори
Mišković, ŽarkoMitrović, Radivoje
Stamenić, Zoran
Dimić, Aleksandar
Danko, Jan
Bucha, Jozef
Milesich, Tomas
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
A study of the influence of extruded material type and layer thickness on the surface roughness and the geometry accuracy on a 3D printed gear tooth profile is presented in this paper. A whole set of samples with the same geometric characteristics is printed from two types of materials (PLA and ABS plastic) and with different layer thickness: 0.1; 0.2; and 0.3 mm. The results of roughness testing and uniformity of the layer thickness are presented in this paper. By comparing the results of samples testing from PLA and ABS plastics with the same 3D printing parameters, a certain conclusions are presented at the end of the paper.
Кључне речи:
layer and surface roughness / geometry parameters / 3D printed gearsИзвор:
Machine Design, 2018, 10, 1, 1-6Издавач:
- Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad
Финансирање / пројекти:
- SK-SRB 2016-0054
- Развој методологија за повећање радне способности, поузданости и енергетске ефикасности машинских система у енергетици (RS-MESTD-Technological Development (TD or TR)-35029)
Колекције
Институција/група
Mašinski fakultetTY - JOUR AU - Mišković, Žarko AU - Mitrović, Radivoje AU - Stamenić, Zoran AU - Dimić, Aleksandar AU - Danko, Jan AU - Bucha, Jozef AU - Milesich, Tomas PY - 2018 UR - https://machinery.mas.bg.ac.rs/handle/123456789/2759 AB - A study of the influence of extruded material type and layer thickness on the surface roughness and the geometry accuracy on a 3D printed gear tooth profile is presented in this paper. A whole set of samples with the same geometric characteristics is printed from two types of materials (PLA and ABS plastic) and with different layer thickness: 0.1; 0.2; and 0.3 mm. The results of roughness testing and uniformity of the layer thickness are presented in this paper. By comparing the results of samples testing from PLA and ABS plastics with the same 3D printing parameters, a certain conclusions are presented at the end of the paper. PB - Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad T2 - Machine Design T1 - Comparison of 3D Printed Gear's Geometrical Characteristics EP - 6 IS - 1 SP - 1 VL - 10 DO - 10.24867/MD.10.2018.1.1-6 ER -
@article{ author = "Mišković, Žarko and Mitrović, Radivoje and Stamenić, Zoran and Dimić, Aleksandar and Danko, Jan and Bucha, Jozef and Milesich, Tomas", year = "2018", abstract = "A study of the influence of extruded material type and layer thickness on the surface roughness and the geometry accuracy on a 3D printed gear tooth profile is presented in this paper. A whole set of samples with the same geometric characteristics is printed from two types of materials (PLA and ABS plastic) and with different layer thickness: 0.1; 0.2; and 0.3 mm. The results of roughness testing and uniformity of the layer thickness are presented in this paper. By comparing the results of samples testing from PLA and ABS plastics with the same 3D printing parameters, a certain conclusions are presented at the end of the paper.", publisher = "Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad", journal = "Machine Design", title = "Comparison of 3D Printed Gear's Geometrical Characteristics", pages = "6-1", number = "1", volume = "10", doi = "10.24867/MD.10.2018.1.1-6" }
Mišković, Ž., Mitrović, R., Stamenić, Z., Dimić, A., Danko, J., Bucha, J.,& Milesich, T.. (2018). Comparison of 3D Printed Gear's Geometrical Characteristics. in Machine Design Univerzitet u Novom Sadu - Fakultet tehničkih nauka, Novi Sad., 10(1), 1-6. https://doi.org/10.24867/MD.10.2018.1.1-6
Mišković Ž, Mitrović R, Stamenić Z, Dimić A, Danko J, Bucha J, Milesich T. Comparison of 3D Printed Gear's Geometrical Characteristics. in Machine Design. 2018;10(1):1-6. doi:10.24867/MD.10.2018.1.1-6 .
Mišković, Žarko, Mitrović, Radivoje, Stamenić, Zoran, Dimić, Aleksandar, Danko, Jan, Bucha, Jozef, Milesich, Tomas, "Comparison of 3D Printed Gear's Geometrical Characteristics" in Machine Design, 10, no. 1 (2018):1-6, https://doi.org/10.24867/MD.10.2018.1.1-6 . .